Frankie,

Isn't the G-70 output stereo? If this is the case, run the G-70 through channel's 1 and 2, set the presets to 55 or 57, make sure both channel's volume levels are set equally and you'll be amazed at how rich and full the sounds will be coming from that G-70.

Channels 3 and 4 of the PAS are not EQ'd with the PAS presets, therefore, anything you run through them will have to be EQ'd on the mixer itself.

Good Luck,

Gary

------------------
Travlin' Easy
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)