AJ.,
Thanks for explaining with an example...

Now I will explain a little more of the flexibility and solution if you want it to work differently.
And as AJ said only some styles have any issue with partial fills.

The styles you used as an example in fact do work that way and there is probably others. I change them if I want to as I run into them...some I leave alone. It depends on the style and how the fill sounds...sometime I like to fill ANYTIME, others don't always sound good at just any beat so I change them.

I actaully just timed it...it takes about 6 seconds to do it and it is very simple.

1) Be sure in media mode that factory styles is UNLOCKED...that way you can change them. YES, all factory styles can be changes anytime you want, then re-saved to the original or a new one...nice feaure!

2) Select the style you want to change.
3) Press Record and select change current style
4) When the scren pops up select the Cue Tab at the bottem.
5) Select fill 2 or fill 2 as the CV
6) Change the Cue mode to NEXT MEASURE, FIRST MEASURE
7) Press Top corner for the write pulldown menu and select write style, press OK.
8) Exit from record mode.

All done..now the fills will not come in on the third beat...which is waht causes the issue AJ pointed out.

It is really neat as you can press fill 1 or 2 at either the first beat OR second and get a fill...(that sounds fine) but if you press it on the 3rd or 4th it will wait until the next measure to start the fill.

So, you can have it anyway you want BY STYLE, Immediate (where it sounds OK to you) or like Yamaha on the first beat of next measure.

Lee