Ted Rose,
A start:
1-You need a lead sheet – Music notation and the chords, single line of melody is fine.

2-Decidie on the intro you are going to use. Then count the measures the intro takes.

3-On your music number each measure – 1 - 2- 3- 4, but make allowance for the intro. If the intro is four measures begin numbering the sheet music with a number 5 at the first measure.

4-Off the top of my head – no keyboard or manual.
Enter step mode in the Sequencer, select chords.

5-Press on hold your beginning chord, normally the same name as the song. (Left hand) “C” for C major –Eb for Eb major. Then press your intro.

6-Your chord view in the window will jump to the fifth measure allowing the room for the intro. Hold the chord that you have in the fifth measure of the sheet music – to the right just above the keys you will see values – Whole note, Half note Ect. Press the value that you want, the window view will move to the next measure if you have chosen a whole note. If the sheet music has two chords in the measure press (Right side) half note, then enter the second chord to complete the measure.

7-Complete entering the chord progression from the sheet music and the press the ending you decided on. Finished.

8-Go directly to save, you don’t want to lose what you have done.

Press start and the sequence will play with no melody, you supply that. Here is one way to sequence a song, much can be added, it is a start.

John C.