There's several factors to consider Boo in your quest for 'noise free' recordings.
1. Your Computer is older and slower (much like I'm getting

) and will have an extremely hard time dealing with massive amounts of audio data being sent to it and then you try recording that data to your Multi-track software, etc. Noise and distortion can filter in just because your computer is a dog (no offense) and for no other reason. Pops and clicks within the recording are also notorious on slower computers such as yours. Slower computers have a hard time processing the information (data) fast enough. In other words; they can't keep up with what's being fed them and essentially "choke", sputter, bog down, and can't handle it. There's too many 'bottlenecks' within the confines of a slow out of date Computer. The Bus speeds on older Motherboards are a trickle compared to current Motherboards. Older Motherboards can't handle faster RAM specs and speeds like Rambus and DDR or in some cases even SDRAM PC133. And when you have too many instructions bombarding the CPU at once, things start to go awry. Memory plays a huge part. If and when you get a new Computer make sure it has AT LEAST 512 MB of RAM. 1 Gigabyte is even better. 2 Gigabyte is better still, etc., etc. And go for the fastest RAM spec speed you can get whether Rambus or DDR. DDR2 is on the horizon which will be faster yet. The fastest DDR right now is 533MHz. IF you got the dough, GOOOOO for it!
2. Your Mackie 808S Mixer may be a culprit too. The 808S has a significant amount of THD "Total Harmonic Distortion" measuring in at 0.10% @ 8 ohms and 0.15% @ 4 ohms. As a comparison the Mackie 1202 VLZ PRO Mixer has a THD "Total Harmonic Distortion" of under 0.0007%. Also the quality of your preamps on your Mixer plays a part too.
3. The quality of Cables you are using whether it be a Mic Cable or Cables coming out your Mains on your Keyboard also play a part in the scheme of things. The better the Cables the better the sound will be (all things considered equally).
4. The Recording software you use plays a role. For instance; one Brand of software will record audio signals in a pristine manner, in other words; FANTASTIC SOUNDING!! while another is just so so at doing it. So depending on the recording software you use your mileage will vary.
5. And then there is the "Sound Card" which plays THEE most important role in your quest to acheiving quality prisitine noiseless distortion free sound from your recordings.
The better the Sound Card the better your recordings will be (all things considered equally).
6. The Mic you use to record with plays a role too of course. The better the Mic the better the sound needless to say.
Boo, I think it's time to dip into your 401K (if that's possible

) or your nest egg or whatever and first of all get a new Computer. That would be my first step if it were me and I had a dinasaur Computer (no offense meant). Then get a decent Sound Card. Spend the bucks Boo if you're wanting to achieve good noise free recordings. A Sound Blaster Live! just won't do IMO. I could keep going down the list but I hope you're getting the picture here Boo.
These are all my opinions of course Boo. Money may be a big hurdle and you can only do as much as finances allow. Please don't go into debt now, okay??

But if you can swing it you won't be sorry IMHO.
Best regards,
Mike
[This message has been edited by keybplayer (edited 02-23-2004).]