SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#146514 - 01/22/06 02:39 PM Re: S90ES or T2
keybplayer Offline
Senior Member

Registered: 10/27/03
Posts: 2417
Loc: CA
Quote:
Originally posted by KeithB:
On the ES7 all DIMM memory loads are lost on shut down. The only way to get it on start up is to use the auto load function, which is descibed somewhere in the manual. I've sold my ES7 so do not have it available to provide more detail.
Keith


Yes, you are correct. DIMM memory is for the Sampler function where created or edited Samples (Voices from the CD Sound Library), etc. can be stored in the DIMM[S] but must be transfered to a computer (via USB, etc.) or to a Thumb Drive or external Hard Drive or a Smart Media Card since all stored Data in the Sampling memory, i.e. DIMM[S] will be lost on power down.

But you CAN save Voices loaded into the Motif ES (from the Sound Library CD, etc.) and like I said previously they can be saved into the Motif ES's "internal Flash ROM memory" or even to a Smart Media Card which can be inserted into the Motif ES's Smart Media slot and left in indefinitely. You WILL have to load the Data from the Smart Media Card back into the Motif ES on power up but the Smart Media Card makes it very convenient and it is a very quick process.

Tim, page 85 of the Motif ES Manual will explain the process of saving and storing data. Saving and storing the data, e.g. Voices from the CD, etc. to the Motif ES's "internal user memory" will save the data from being lost on power down. Otherwise if you save it to the SM Card, Computer, Thumb Drive, etc. you will obviously need to reload that data back into the Motif ES.

And as Keith said there is an Auto Load function which can be used in conjunction with the Smart Media Card or an external Hard Drive/Thumb Drive, etc. On Power Up the Motif ES will automatically load the Data you instructed it to load.

PS: The Auto Load function can be tricky to set up. You may want to check the Motifator.com Forums for a "how-to" step by step procedure about the auto-load process since the Manual I found was less than detailed on how to do so. Although you may find the Manual's explanation adequate nonetheless.

Best regards,
Mike



[This message has been edited by keybplayer (edited 01-22-2006).]
_________________________
Yamaha Genos, Mackie HR824 MKII Studio Monitors, Mackie 1202 VLZ Pro Mixer (made in USA), Cakewalk Sonar Platinum, Shure SM58 vocal mic.

Top
#146515 - 01/24/06 07:16 AM Re: S90ES or T2
CoasterTim Offline
Member

Registered: 06/10/00
Posts: 624
Loc: Allentown, PA, USA
Mike, thanks. I got it. I had to save the voices to an autoload file and store the files on a smart card, which has to be in the board at power-on. Tried it, it works!

Tim
_________________________
Tim Schaeffer

-----------------------------------------------------------
YAMAHA CVP-509 / Korg Pa300

Top
#146516 - 01/24/06 09:32 AM Re: S90ES or T2
Scottyee Offline
Senior Member

Registered: 12/01/99
Posts: 10427
Loc: San Francisco Bay Area, CA, US...
Coaster Tim: congrats on getting the Motif KB. Would love now to hear how you & your church are utilizing the Motif with your band, perhaps by sharing a song produced by your ministry on it. - Scott
_________________________

Top
Page 2 of 2 < 1 2

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online