don,also phil has a tyros,maybe you can email him if you have any queries,mike

Dave, I've done this. It will save everything EXCEPT the mic DSP. It should work the same as 2000-2100, but so far I haven't been able to get it to do that.
I'll check the OS today.
Don

Don:
http://www.yamahapkclub.com/tyros/download/os_verup/os_verup.htm#usb

Okay Don here you go. I will give you the settings I use on my Tyros that will get it to "stay" for you in Registration to the "User" memory area. Of course my Tyros has OS version 1.20 so if yours doesn't then it may not work for you. I recommend you upgrade to version 1.20 first because there are bug fixes and other enhancements in version 1.20. But it might work with an earlier version OS too.

Are you ready?

Okay, this is how I got it to work with my Tyros. First thing on Power Up I changed the default Style from Live8Beat to Cool8Beat. That is my preference but you may want to keep the default Live8Beat. Next go into Digital Recording/Song Creator/Channel and scroll down to #5 (Set Up). Under SELECT make sure just the top 7 settings next to SONG are selected and ALL the other ones below them are "un"-checked including the Mic setting.

Hit the Exit button twice to get back to the main screen. Then go into the Mixing Console/Effect/Type and set the Block, Part, Category, and Type to your liking, ie., DSP6 Part (Mic) DELAY and ECHO. Now without exiting the EFFECT screen push the FUNCTION button under MENU. Push "I" - UTILITY then go to Parameter Lock and make sure the 'Reverb Return Level' 'Mic.Setting' and 'Reverb Type' are "un"-checked. Hit the Exit button twice to get back into the EFFECT screen. Double check your settings then press the Registration 'Memory' button and choose a number 1-8 to the left of the Memory button. NOTE: Make sure after hitting the Memory button that "ALL" items in the Registration Memory 'Group Select' are "checked". Then press a number 1-8. Next, press the Exit button twice to get back to the Main screen. Press "J" 'Registration Bank' and then press 6 to Save your new Registration. Name the Registration if you wish and of course you'll have to Save the new Name too by pressing Save again. Double click your new Registration and then enable it by pressing the appropriate number, ie., 1-8. It turns red when you press it to let you know it's enabled. (You know that of course but I told you I'd give you a step by step procedure ). With the Registration 'enabled' turn off the Tyros, wait at least 10 secs. (to give it time for the Hard Drive to spin down completely) then Power On the Tyros again. Go into your Registration Bank and select your custom Registration. After selecting it, enable it and then go into the Mixing Console and see if you hit pay dirt.

Best regards,
Mike

[This message has been edited by keybplayer (edited 03-20-2004).]

Oh, btw Don. If you do an upgrade of the OS I recommend you use the Floppy Disk method. The USB way can be tricky especially with an earlier version OS. I upgraded my Tyros using Floppy Disks and it went smooth as silk. Make sure you follow the directions to the tee and you should have no problem. Print the instructions out and what I did was use a small empty 10 pack floppy disk container (cardboard type) and put all the Disks of Data from the OS upgrade into it and put it right on the floppy disk holder above the Floppy Disk Drive of the Tyros. That way they're all in order, in sequence and ready at hand.

Best regards,
Mike

Thanks guys!
Mike, I never tried going to the Song setup, but I will now.
Don