SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#187605 - 10/03/04 12:07 AM Behringer PMX2000 & PMH880S, 500 vs 800 watts
Scott Langholff Offline
Senior Member

Registered: 06/09/02
Posts: 3163
Loc: Pensacola, Florida, USA
I am hoping to try these two PA heads real soon.

I can get the new PMH880S for about $70 more than the PMX2000.

Is having 800 watts over 500 watts worth it?

Anything else to consider?
http://www.behringer.com/PMH2000/index.cfm?lang=ENG

http://www.behringer.com/PMH880S/index.cfm?lang=ENG

Scott Langholff

Top
#187606 - 10/03/04 05:33 AM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
OldNewb Offline
Member

Registered: 01/19/04
Posts: 638
Loc: Shorewood Wi. USA
Scott,
looking quickly at the two pics I noticed the newer 800 watt version has two extra knobs per channel. I can not tell what they are for but the old saying more is better would seem to apply when it comes to control at least.
For the difference (if you can cover it ok) I would definitely choose the 800 watt version.

------------------
The old Newb
_________________________
Thank You
The old Newb

Top
#187607 - 10/03/04 08:25 AM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
ViLo Offline
Member

Registered: 06/30/01
Posts: 461
Loc: Dallas Tx., USA
Quote:
Originally posted by Scott Langholff:
I am hoping to try these two PA heads real soon.

I can get the new PMH880S for about $70 more than the PMX2000.

Is having 800 watts over 500 watts worth it?

Anything else to consider?
http://www.behringer.com/PMH2000/index.cfm?lang=ENG

http://www.behringer.com/PMH880S/index.cfm?lang=ENG

Scott Langholff


I bought the PMX2000 for my church and it works great, I hve not seen or heard the PMH880S.



------------------
ViLo
HE'S COMING, MAKE MUSIC, GET READY! smile

Top
#187608 - 10/03/04 08:52 AM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
kbrkr Offline
Senior Member

Registered: 11/19/02
Posts: 2866
Loc: Tampa, FL
Scott,

I've been using the PMX2000 for a year now.

I absolutely love it!!!

The main difference I can see from these two is that 8805 only has 2 stereo inputs as opposed to 3 on the pmx2000.

The 3 inputs for me was the deciding factor in purchase As I can use 2 keyboards and 1 rack module without any use of mixers or inserts.

The power and features along with the price is a can't lose on the 2000. I purchased my pmx2000 from 269 as a re-stock from Music123. These were cheaper new 299 when they were first released last year, but now I see they have been bumped up to 349.

Al
_________________________
Al

Pa4x - LD Systems Maui 28 - Mackie Thumps

Top
#187609 - 10/03/04 01:49 PM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
Scott Langholff Offline
Senior Member

Registered: 06/09/02
Posts: 3163
Loc: Pensacola, Florida, USA
Hi ViLo & kbrkr

I take it that the 2000 has more volume than you need for your purposes.

I like the idea of only 20 lbs and the smaller dimensions for the 880S, but I also like the idea of having the 2000 sitting on its left side to my left of the keyboard.

I figure I could easily tweak the eq on the fly if I plugged into the last stereo channel on the right, where it doesn't look like I could manage that with the 880S.

Maybe tweaking on the fly is not that big of a deal, considering I have the built in mixer in my Tyros.

Scott

Top
#187610 - 10/03/04 03:21 PM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
Alex K Offline
Member

Registered: 12/03/99
Posts: 732
Loc: Phoenix, AZ USA
Scott,

I would absolutely go with the 880.

Although it has fewer channels (8 instead of 10), it is stereo, as opposed to 2000 which is mono. It also has two effect busses, over 1 on 2000 - those are the two extra knobs (channel pan and FX2).

I think that we have discussed extensively enough the value of having stereo amplification capability when playing arranger keyboards. To me this is a definite plus.

As far as power goes, I understand that it is always a good idea to have your power amp capable of supplying more power than the speakers can handle (otherwise you overdrive the amp's power output, and the harmonics can damage your speaker), although you have to be careful not to turn the master volume output too high. So if in addition to being stereo and having more flexible effect section I get more power for only $70 more, I will gladly take it.

On the other hand, what I would have really liked is having a third built-in amp, which I could use for monitoring myself. Unfortunately, only a much more expensive Mackie 808S has that feature.

Regards,
Alex
_________________________
Regards,
Alex

Top
#187611 - 10/03/04 03:46 PM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
kbrkr Offline
Senior Member

Registered: 11/19/02
Posts: 2866
Loc: Tampa, FL
Alex,

You are wrong; the 2000 is STEREO.
_________________________
Al

Pa4x - LD Systems Maui 28 - Mackie Thumps

Top
#187612 - 10/03/04 05:28 PM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
Bill in Dayton Online   happy
Senior Member

Registered: 08/23/04
Posts: 2207
Loc: Dayton, OH USA
Scott-

I've been using the PMX2000 for about 6 months now and am very, very happy with it. I'm running it into 2 EV I's with outstanding results.

Regardless if I'm working as a one man band or with my quartet, the PMX2000 gives me more power than I need...usually never setting the channel volumnes past 4 and the main past 3.5 ...In other words...that unit has lots more power than I can use...

The stereo channels are awesome as I routinely run my keys and vocals each in stereo.

Effects, IMO, are average to slightly above...

You can either run one main mix OR an independant main and monitor mix...The flexibility is nice...

I think you'd be pleased with this unit...

Bill in Dayton
_________________________
Bill in Dayton

Top
#187613 - 10/03/04 05:34 PM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
Scott Langholff Offline
Senior Member

Registered: 06/09/02
Posts: 3163
Loc: Pensacola, Florida, USA
These are some very good reports I'm hearing.

What if I decided to run one or two subwoofers along with the PR12's? Can this be done and how would one hook that up?

Scott

Top
#187614 - 10/04/04 12:51 AM Re: Behringer PMX2000 & PMH880S, 500 vs 800 watts
Alex K Offline
Member

Registered: 12/03/99
Posts: 732
Loc: Phoenix, AZ USA
Quote:
Originally posted by kbrkr:
Alex,

You are wrong; the 2000 is STEREO.


Perhaps, but how do you pan the mono channels? It is extremely important to be able to do that for your individual inputs, unless you are physically bunching up all the people using the microphones in the center of the stage.

From the pictures the 880 appears to have PAN pots, while the 2000 does not.
_________________________
Regards,
Alex

Top
Page 1 of 2 1 2 >

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online