What to do when a snaredrum in a userstyle is
too loud.
-Press the Functionbutton.
-Go to Userstyle composer.
-Press Micro.
-Here you can see and hear which key
represents the snaredrum.
-Go back.

-Again press the Functionbutton.
-press Userstyle composer on the screen.
-press EDIT
-press VELOCITY
-if the instrumentkey is C(just an exam-
ple) make the velocitychange from
C to C# . On the screen you can see where
you have to write C and where C#.
From C to C# means that only the C instru
ment will be edited.
-set the velocity on -25 (example).
-press execute on the screen
-go back and SAVE your changed userstyle!
-Now you have changed the userstyletrack!
-Do the same with other tracks of the same
style.

Hi!

Nice trick! Do you know how to fade in/out the music?

Sander

Turn the VOLUME slow from MAX to MIN.

Mart,

Smart suggestion.......! But that won't go if you're are busy with your hands.. I already figured this out of course and it doesn't work and won't fade out very nice.

So there's just no Fade Out button..

Yes Sander there is no fading out,but here is
another trick for VA users.
HOW TO CHANGE ONE DRUMINSTRUMENT FOR ANOTHER.
You have a nice userstyle but one thing is
not as you like it.You want the snaredrum
change for a closed hihat.
Read my first trick. The first part of it is
the same but now you don't use the VELOCITY.
This time you have to TRANSPOSE.
Again you have to isolate the key that repre-
sents the instrument of the drumset you want
to change. As an example FROM D1 to D1#.
Transpose so many halftones as necessary to
the instrument you want.Than EXECUTE and the
job is done. Go back and SAVE the changed
userstyle on disk or Zip.
In this way you can take another instrument
for the Maj. the Min. and the 7th track.
Sometimes this can be usefull because it
brings some extra variation in the userstyle.
READ THE FIRST TRICK IF YOU DON'T UNDERSTAND.
Of course you can change as many instruments
as you like.

These tricks are great Mart.Please go on!

Hi Mart,
Now I can change my userstyles and impro-
ve them.Do you have a trick for converted
styles, sometimes there are strange sounds
in them.

As a special request TRICK 3 !
OK Deb I think I know what you mean. In the
converted styles from the X1 are in the gui-
tar parts wrong tones.
Once you have seen trick 1 and 2 you know
that you can go to the MICRO and find out
which note is the wrong one.
Go to EDIT and DELETE that note in the same
way as you did before.
Example FROM C6 TO C6# and EXECUTE.
Go back and SAVE.

Again such a good trick Mart!Now I can use
more of the converted X1 styles that I down-
loaded from the net.

Go on Mart.Supertricks!