Originally posted by Fran Carango:
The Traynor K4 takes 10 seconds..plug it in and turn on the power switch..
and it had more "real" power too.. Fran,
It's not nice to fib to the good folks on the zone. The K4 is only 300-watts peak-power, no subwoofer and does not come with the forklift needed to get it out of the car. The L1 is 1,400-watts peak, 750-watts RMS--no forklift required.
TRAYNOR K4TRAY Specs
Total Power: 300 Watts (200 Watts LF, 2 x 50 Watts H/M F)
Speaker Configuration: 1 x 12-inch 200 Low-Frequency Speaker
2 x 4.5-inch 30 watt Mid-Frequency Speakers
2 x 20 watt High-Frequency Compression Drivers
Channel 1 Input: 4 x ¼-inch TRS balanced (2 x Stereo Pairs)
Channel 1 Controls Gain control
Selectable Solid State or Tube input circuitry
Channel Voicing
3-band Channel EQ
Lead Gain Level
Tube-Drive Gain
Lead boost on / off
Channel 2 Inputs 2 x ¼-inch TRS balanced (Stereo Pair)
1 x XLR balanced microphone
Channel 2 Controls Gain Control
3-band Channel EQ
Channel 3 Inputs 2 x ¼-inch TRS balanced (Stereo Pair)
2 x RCA unbalanced
Channel 3 Controls Gain Control
Channel 4 Inputs Stereo ¼-inch Stereo Pair - Post Master Inputs
(located on rear of amplifier)
Channel 4 Controls Level control (located on rear of amplifier)
Master Section Volume control
Stereo XLR line output jacks w/ ground lift
Lead boost footswitch jack
1 x ¼-inch TRS headphone output
1 x ¼-inch mono sub output jack
Dimensions (WHD): 23.2 x 19.6 x 14.7
58.9 x 49.7 x 37.3
Weight (lbs/kg) 50 / 22.6
Bose L1 Specs
Mechanical
* L1 Model I Cylindrical Radiator® top
43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
14.5 lbs (6 kg)
* L1 Model I Cylindrical Radiator® bottom
43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
16.0 lbs (7 kg)
* L1 Model I power stand
5"H x 26"W x 26"D (12.7 cm x 66 cm x 66 cm)
35 lbs (16 kg)
* B1 bass module
15''H x 10 1/4''W x 17 3/4''D (38.0 cm x 26.0 cm x 45.0 cm)
25.1 lbs (11.4 kg)
* R1 remote
1 3/5"H x 2 4/5"W x 5 3/5"D (4.0 cm x 7.1 cm x 14.1 cm)
0.6 lbs (0.27 kg)
Electrical
* AC power rating
100-120V 50/60Hz
1400W (USA/Canada)
Power stand inputs/outputs
* Two combination XLR-1/4" inputs (channels 1 and 2)
* Two 1/4" line inputs (3 and 4)
* Two XLR outputs (1 and 2)
* Two TRS inserts/effects loops (1 and 2)
* Neutrik NL4 bass module output
* 1/4" bass line output
* Digital data in
* Digital data out
* R1 remote in
What's in the Box
L1 Model I Cylindrical Radiator® box
* Loudspeaker top and bottom
* Carrying bags
Power stand box
* Power stand
* Power cord
* R1 remote and cable
* Spare fuse
* Protective plug
* Carrying bag
B1 bass module box
* B1 bass module
* B1 bass module cable
* Carrying bag
Documents
* L1 Model I System Owner's Guide
* L1 Model I System Quick Set-up Guide
* B1 Bass Module Installation Guide
Cheers,
Gary
------------------
Travlin' Easy