Originally posted by Fran Carango:
The Traynor K4 takes 10 seconds..plug it in and turn on the power switch.. ![](http://www.synthzone.com/ubbs/smile.gif)
and it had more "real" power too.. ![](http://www.synthzone.com/ubbs/biggrin.gif)
Fran,
It's not nice to fib to the good folks on the zone. The K4 is only 300-watts peak-power, no subwoofer and does not come with the forklift needed to get it out of the car. The L1 is 1,400-watts peak, 750-watts RMS--no forklift required.
TRAYNOR K4TRAY Specs
Total Power: 300 Watts (200 Watts LF, 2 x 50 Watts H/M F)
Speaker Configuration: 1 x 12-inch 200 Low-Frequency Speaker
2 x 4.5-inch 30 watt Mid-Frequency Speakers
2 x 20 watt High-Frequency Compression Drivers
Channel 1 Input: 4 x ¼-inch TRS balanced (2 x Stereo Pairs)
Channel 1 Controls Gain control
Selectable Solid State or Tube input circuitry
Channel Voicing
3-band Channel EQ
Lead Gain Level
Tube-Drive Gain
Lead boost on / off
Channel 2 Inputs 2 x ¼-inch TRS balanced (Stereo Pair)
1 x XLR balanced microphone
Channel 2 Controls Gain Control
3-band Channel EQ
Channel 3 Inputs 2 x ¼-inch TRS balanced (Stereo Pair)
2 x RCA unbalanced
Channel 3 Controls Gain Control
Channel 4 Inputs Stereo ¼-inch Stereo Pair - Post Master Inputs
(located on rear of amplifier)
Channel 4 Controls Level control (located on rear of amplifier)
Master Section Volume control
Stereo XLR line output jacks w/ ground lift
Lead boost footswitch jack
1 x ¼-inch TRS headphone output
1 x ¼-inch mono sub output jack
Dimensions (WHD): 23.2 x 19.6 x 14.7
58.9 x 49.7 x 37.3
Weight (lbs/kg) 50 / 22.6
Bose L1 Specs
Mechanical
* L1 Model I Cylindrical Radiator® top
43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
14.5 lbs (6 kg)
* L1 Model I Cylindrical Radiator® bottom
43''H x 3 1/2''W x 4''D (1.1 m x 8.9 cm x 10.5 cm)
16.0 lbs (7 kg)
* L1 Model I power stand
5"H x 26"W x 26"D (12.7 cm x 66 cm x 66 cm)
35 lbs (16 kg)
* B1 bass module
15''H x 10 1/4''W x 17 3/4''D (38.0 cm x 26.0 cm x 45.0 cm)
25.1 lbs (11.4 kg)
* R1 remote
1 3/5"H x 2 4/5"W x 5 3/5"D (4.0 cm x 7.1 cm x 14.1 cm)
0.6 lbs (0.27 kg)
Electrical
* AC power rating
100-120V 50/60Hz
1400W (USA/Canada)
Power stand inputs/outputs
* Two combination XLR-1/4" inputs (channels 1 and 2)
* Two 1/4" line inputs (3 and 4)
* Two XLR outputs (1 and 2)
* Two TRS inserts/effects loops (1 and 2)
* Neutrik NL4 bass module output
* 1/4" bass line output
* Digital data in
* Digital data out
* R1 remote in
What's in the Box
L1 Model I Cylindrical Radiator® box
* Loudspeaker top and bottom
* Carrying bags
Power stand box
* Power stand
* Power cord
* R1 remote and cable
* Spare fuse
* Protective plug
* Carrying bag
B1 bass module box
* B1 bass module
* B1 bass module cable
* Carrying bag
Documents
* L1 Model I System Owner's Guide
* L1 Model I System Quick Set-up Guide
* B1 Bass Module Installation Guide
Cheers,
Gary
------------------
Travlin' Easy