SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#260222 - 03/22/09 04:15 PM 802's performance update
Fran Carango Offline
Senior Member

Registered: 05/26/99
Posts: 9673
Loc: Levittown, Pa, USA
No change here....They are working great...No cut outs, no loss of highs, like the two problems mentioned by other SZoners...

Last night I worked as a duo..played a 6,000 square feet room..180 people..dinner dance..We were set up in front of a large dance floor, the 802's upright on the floor about eight feet apart...with Kath and myself between them..

The dining tables were set around the dance floor and to the far end of the room...

I played some MP3's on sound check, setting volumes (at the time a near empty room)...at less than 25 percent volume ..already too loud..I was using a mixer with the 802's..basically for Kath's wireless mic and her preferred eq and effects...I ran my G70 into another channel (flat channel), and my mic, and the Laptop into the inputs of the G70...easy control for me...

The 802's performed perfect, with several comments from the audience, how surprisingly great sound from such small speakers (their words)...

This was the first time Kath heard the 802's...She is thinking of buying a pair for herself....

After dinner, it was time for "dance music"...so with a slight boost in volume and eq'd for more bass...the 802's responded well....A very BIG sound, in a small package..and I had tons of headroom...

I had Roland Cubes in my van, in case the room was too much for the 802's......They stayed in the van....


So , how are other's fairing with the 802's and the 10's..I would like to hear from you people....So far for me..it has been a blue chip purchase, with tokens for money...
_________________________
www.francarango.com



Top
#260223 - 03/22/09 05:34 PM Re: 802's performance update
zuki Offline
Senior Member

Registered: 09/20/02
Posts: 4724
I love 'em - both the 8s in the studio and the 10s live - LOVE THE 10s live - probably can handle anything Do not miss the Mackies for 1 minute and the buyer is happy too.
_________________________
Live: Korg PA4X/EV Everse 8s/Senn 935/K&M stand

Studio: Korg PA4X/Yamaha DGX670/Nord 6D73/Boss BR900CD/Tascam DP24SD/MTM Iloud/Sony C80/AGK 214/ATEM Mini Pro switcher/K&M stand

Top
#260224 - 03/22/09 10:17 PM Re: 802's performance update
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Glad to hear the 802's are performing admirably.

enjoy

Top
#260225 - 04/09/09 09:09 AM Re: 802's performance update
Princess Offline
Member

Registered: 11/04/07
Posts: 100
Loc: Michigan
Hi Fran; I had my 4 new 12" 1202's on back order and was notified they shipped to me on Tuesday :~) I'm looking forward to using them.The people at OFD were great and very professional and friendly!!
_________________________
My Keyboards is how I drive my Husband NUTS!!!

Top
#260226 - 04/09/09 09:27 AM Re: 802's performance update
Tom Cavanaugh Offline
Senior Member

Registered: 12/06/99
Posts: 2133
Loc: Muskegon, MI
Fran,

Come on, you are pulling our leg. Those 802s couldn't possibly work that well, they didn't cost enough. You can't possibly get enough bass without an 18 inch 250 pound powered subwoofer. We both know that only big heavy expensive brand name equipment is good enough for us pros.

Tom
_________________________
Thanks,

Tom

Top
#260227 - 04/09/09 11:01 AM Re: 802's performance update
cassp Offline
Senior Member

Registered: 03/21/03
Posts: 3748
Loc: Motown
I've checked OFD's site and eBay store and I really can't see how or why these homemade speakers can be any better than the brand stuff. Less expensive, yes; I once made a set of 2x12" w/horns PA cabs that sounded wonderfully warm and sturdy. The cost back then was way below what a similar brand package would cost. The same seems true for the Proton lines. So it it the cost savings or the sound that is so attractive?
_________________________
Riding on the Avenue of Time
cassp50@gmail.com

Top
#260228 - 04/09/09 12:29 PM Re: 802's performance update
DonM Offline
Senior Member

Registered: 06/25/99
Posts: 16735
Loc: Benton, LA, USA
Quote:
Originally posted by cassp:
I've checked OFD's site and eBay store and I really can't see how or why these homemade speakers can be any better than the brand stuff. Less expensive, yes; I once made a set of 2x12" w/horns PA cabs that sounded wonderfully warm and sturdy. The cost back then was way below what a similar brand package would cost. The same seems true for the Proton lines. So it it the cost savings or the sound that is so attractive?


One way they could do it is to put great components in, with the money they save by not paying big names to use their gear, and by not spending millions on advertising, and by bypassing middle men (brick and mortar stores).
Truth is, for whatever reasons, they sound really good, and for the money are an amazing bargain. We'll see if they hold up a year or two from now. I'm thinking the quality is as good as most big brands.
Comparing them to powered speakers with two amps in each speaker wouldn't really be fair, but I can't tell much difference. Probably could at extreme volume, but I'll never know. If I need something to go REALLY loud I'll use a Bose or two.
DonM
_________________________
DonM

Top
#260229 - 04/09/09 01:04 PM Re: 802's performance update
zuki Offline
Senior Member

Registered: 09/20/02
Posts: 4724
I can attest that both 8s and 10s are still amazing. I love the 10s portability (handle) and power for live. For some reason, the 10s feel like lifting 20 lbs vs the 30s something spec.

Home today from my cortisone (C5/6) injection - not fun. Hurts worse and 3 gigs tomorrow and beyond. Working this afternoon on a new tune (HAD to work out a request for tomorrow) damn near killed me, 'cause playing causes the most pain. I'm getting depressed
_________________________
Live: Korg PA4X/EV Everse 8s/Senn 935/K&M stand

Studio: Korg PA4X/Yamaha DGX670/Nord 6D73/Boss BR900CD/Tascam DP24SD/MTM Iloud/Sony C80/AGK 214/ATEM Mini Pro switcher/K&M stand

Top
#260230 - 04/10/09 06:26 AM Re: 802's performance update
Ketron User Offline
Member

Registered: 02/02/02
Posts: 220
Can't believe you play with that rubish !
Are you really serious about that ??

Top
#260231 - 04/10/09 06:44 AM Re: 802's performance update
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2207
Loc: Dayton, OH USA
Quote:
Originally posted by zuki:
I can attest that both 8s and 10s are still amazing. I love the 10s portability (handle) and power for live. For some reason, the 10s feel like lifting 20 lbs vs the 30s something spec.

Home today from my cortisone (C5/6) injection - not fun. Hurts worse and 3 gigs tomorrow and beyond. Working this afternoon on a new tune (HAD to work out a request for tomorrow) damn near killed me, 'cause playing causes the most pain. I'm getting depressed


Hope you're feeling better, Jim...

Let me know if I can help out in some way...

Cheers-

------------------
Bill in Dayton
_________________________
Bill in Dayton

Top
#260232 - 04/10/09 09:54 AM Re: 802's performance update
Jerryghr Offline
Senior Member

Registered: 01/14/02
Posts: 1497
Loc: Buffalo, NY
Quote:
Originally posted by Ketron User:
Can't believe you play with that rubish !
Are you really serious about that ??


Great review!!!

Just curious. Where did you hear them?

[This message has been edited by Jerryghr (edited 04-10-2009).]

Top
#260233 - 04/10/09 09:00 PM Re: 802's performance update
zuki Offline
Senior Member

Registered: 09/20/02
Posts: 4724
Quote:
Originally posted by Ketron User:
Can't believe you play with that rubish !
Are you really serious about that ??


Just curious - were you referring to my injury or the Podiums?
_________________________
Live: Korg PA4X/EV Everse 8s/Senn 935/K&M stand

Studio: Korg PA4X/Yamaha DGX670/Nord 6D73/Boss BR900CD/Tascam DP24SD/MTM Iloud/Sony C80/AGK 214/ATEM Mini Pro switcher/K&M stand

Top
#260234 - 04/14/09 08:39 AM Re: 802's performance update
Princess Offline
Member

Registered: 11/04/07
Posts: 100
Loc: Michigan
Here's an update on my 12" 1202's that arrived yesterday afternoon :~)First of all the price... $620.00 for 4 powered speakers,( he gave me a price 4 weeks ago when I ordered them and stuck by it even though the price was higher when the new shipment came in.
The packages shipped from(California)tuesday afternoon and were at my door (UP of Michigan) Monday. The packing was great, they protected the speakers wonderfully.
I hooked them up in my studio 18'x 24' and had no problem rattiling the windows and loosing the putty glaze. :~) They sounded very good, a nice clean robust sound and the high, lows worked well to fine adjust my sounds.
The cabinat's look real nice and they seem to be very well built and time will tell on how they hold up.
I have a dance gig next week for aprox 60 people in a large hall and I did't really need more volume with my old speakers but I do want a better sound in those bigger areas. I hope these will do it and will write a note after the show...I do have a roadie (my hubby)so he can haul my stuff and these weigh about 42# each.
Thanks Fran for pointing me toward these Podeom speakers.
Princess
_________________________
My Keyboards is how I drive my Husband NUTS!!!

Top
Page 1 of 2 1 2 >

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online