SYNTH ZONE
Visit The Bar For Casual Discussion
Page 7 of 19 < 1 2 5 6 7 8 9 18 19 >
Topic Options
#28713 - 01/01/01 09:04 AM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Anonymous
Unregistered


Quote:
Originally posted by OldSchool:
Emrys:
I feel your pain. As has been observed on the general forum, there just isn't a substitute for a real drummer.

I've been advised by many folks here that using a sampler for drums is second, as you can record, tweek, and sequence the exact sound you want, and aren't dependent on what the manufacturer burned on the ROM. 3rd place goes to the better quality modules, Roland's V-Drums seemingly getting the most favorable reviews overall (I've heard a TD-8 - it's good). Better drum modules can allow tweeking, which might allow you to find a tom sound which sounds good rolled.


Well, I've actually had a bit of success with getting the leading edge off the individual hits in my rolls. I've spent about 10 hours working on trying to get some of the messages listed in the M-BD1's manual to work, and finally have gotten pretty close by adjusting a parameter called "TVF&TVA Envelope Attack Time". It works nicely for the roll on the hi tom and on the low tom... seems more like a toggle for the mids, though, which is irking me. I'm going to put a sample of pre- and post-tweaking on my site in a bit, if anyone's interested in hearing it. (That's http://www.speedlimit35.com/mbd1rolls.mp3, in case that link doesn't work.)

I've been trying to find a good editor program to use with the M-BD1, without much success... I've tried SounDiver, but I'm shooting in the dark with that, and everything else seems to put the smack down on my W2k box (sudden reboots... wierd). Anyone got any suggestions, or am I gonna have to write my own bloody editor? (Well, I have been looking for a good project to learn java on...)

As soon as I scrape the bucks together, I'm definitely planning on going crazy and picking up a full VPro kit... that thing is suhweet! No, I don't really play drums (I think my IQ's too high ), but I'm pretty sure that with that kit, my sequencer for tweaking, and a set of real cymbals, I'll never have to worry about the sound or realism of my drums again.

------------------
http://www.mp3.com/speedlimit35

Top
#28714 - 01/02/01 11:56 PM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Anonymous
Unregistered


I own a JV-80, JX-305 and a R-70.

Top
#28715 - 01/03/01 06:37 PM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
NisseP Offline
Junior Member

Registered: 01/03/01
Posts: 5
Loc: Gotland
Ive got a
XV-5080 with bass&drums exp card.
Kurzweil 2000r
Roland Super JX-10 with some strange exp cards
Korg X3


[This message has been edited by NisseP (edited 01-05-2001).]

Top
#28716 - 01/04/01 01:00 AM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Love & Peace Offline
Junior Member

Registered: 02/27/00
Posts: 5
Hi my name is David. I have an XV-88 with the SRX-02 piano expansion card, the Experience II and the Super Sound Set. I am hoping that Roland will relaes an SRX Orchestral card at NAMM. Any new rumors? I am also looking to trade sounds with other people. Has anyone developed any improvements on the SRX piano card? Thanks.

Top
#28717 - 01/05/01 05:17 PM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Anonymous
Unregistered


I own a XP-30
KC-500

I just discovered this forum. Let the discussion begin.

Top
#28718 - 01/05/01 05:36 PM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
OldSchool Offline
Member

Registered: 01/27/01
Posts: 217
Loc: Lexington, KY USA
Folks:
In an earlier post I cast aspersions on a Yamaha amp emulator, the DGStomp, which quit on me. Turns out I'd run over the power cord with my office chair wheel - when I returned it, the music store found the cord in two pieces when they took it out of the box. A little solder and shrink-wrap, and it's good as new.

I invite your cat-calls...
_________________________
"The problem with the world is that the ignorant are cock-sure, whereas the intelligent are full of doubt." - Bertrand Russell

Top
#28719 - 01/06/01 06:21 AM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
mibo.lu Offline
Junior Member

Registered: 01/06/01
Posts: 3
Heya, I use a JV-1010. I also have tons of other material not related to this forum, and am quite a power user for all sorts of music/computer tech.

Top
#28720 - 01/11/01 05:31 PM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Anonymous
Unregistered


Hi,

Just became a brand new Roland owner. Got the XV-88 yesterday, and been happily sleepless playing with the new toy.

I do have a question though: someone gave me a Roland CA-30 arranger, but I've never used one before. Can I even use this with the XV-88 (or would I be unwittingly performing some act of desecration by doing so)? If the CA-30 is of any use to me, could someone out there please help me out?

Thanks, and glad to see this board! I think I'll probably be needing a lot of help for a while ....

- EP
epineda@email.com


[This message has been edited by EP (edited 01-11-2001).]

Top
#28721 - 01/14/01 10:42 PM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Anonymous
Unregistered


Hi EPU,

Steve from Miami

I have,

JV-1080 with Vintage Synth, Tekno, and Experience 2 Boards
MC-303
Akai S-950
Oberheim Matrix 1000
Ensoniq SQ-2
Yamaha QY-10
Mac G3-Digital Performer 2.7, Unisyn

I have had the JV-1080 for almost 5 years now, best synth I have ever had.

Anyone know where to find the expansions boards online cheaper then music stores like Sam Ash ect.?

Top
#28722 - 01/15/01 10:24 AM Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
Anonymous
Unregistered


[QUOTE]Originally posted by epu:I have a jv1010 With no extras a jurrasic Alesis(non gm Synth)A tascam 564mdd recorder and a computer with all the necesarys!!!
Oh and of course my trusty steed Dx7.
The only thing i really need is a brains to put it all together!!!!!
Anybody with similar kit is welcome to slag me(via email) of if they can configure such an unusual combo!!!!!(james@dk)

Top
Page 7 of 19 < 1 2 5 6 7 8 9 18 19 >

Moderator:  Admin 



Help keep Synth Zone Online