SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#29966 - 01/16/07 03:58 PM Re: SD1 update, advice needed :)
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
Hi.

Even if I've reported it in another tread, this tread also should
have a happy ending.

Reupdated everything with success. Ketron Italy sent me a tiny
".sty" type file at 96kb to load, and just like magic, the missing
endings is OK again, without any further actions than just "load".
Great!

Happy Playing.
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#29967 - 01/18/07 09:59 PM Re: SD1 update, advice needed :)
Shiju Offline
Member

Registered: 08/03/01
Posts: 103
Loc: Atlanta, USA
Hi GJ,

Can you please clarify the following:

In one of the steps they mention that the total no. of files should be 111. Here are the no. of files I got when I unzip:
PBANKNS1 = 33
PBANKNS2 = 32
PBANKNS3 = 29
PCM86 = 3
PCM88 = 1
PCM90 = 1
PCMA0 = 1
PCMA8 = 1
PCMB0 = 1
PCMB8 = 1
PCM98 = 1
-------------------
Total = 104

Thanks for your reply,

George

Top
#29968 - 01/19/07 02:09 AM Re: SD1 update, advice needed :)
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
Hi.

Full update to 4.0b or c will show:

PBANK1 = 41 files
PBANK2 = 40 files
PBANK3 = 20 files

The files you mention is the not the same "pbank" files,
cause the files you describe ends with "ns" (nosound),
that's the update without soundchanges from 3.0 and I
refer to the manual and downloads for full update.

Cheers
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#29969 - 01/23/07 08:21 PM Re: SD1 update, advice needed :)
Shiju Offline
Member

Registered: 08/03/01
Posts: 103
Loc: Atlanta, USA
Thank you GJ,

I have updated everything as per the manuals. But now I feel that the old sound of the board was better than the new sound. Is there a way we can get the old sound back ?

George

Top
#29970 - 01/23/07 11:19 PM Re: SD1 update, advice needed :)
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
Hi

If you did it as described in manual and used the "nosound"
method, you should still have the "old" sounds as before.
Anyway, what's really changed is described if you follow the
link at the bottom of the "update manual" page.

To downgrade, I think you have to find the 3.0c version of
the pbank files, and then follow what you can read in page
121 in Ketron SD1 manual before update only the OS again.

However, I'm not, I repeat, NOT any clever at the SD1 at all,
and to be sure about what to do, you can try contact Ketron
support by email or by use the contactfield at www.ketron.it

Or, if any luck, maybe AJ see this and take time to give some
advice? Also you could seek through the other posts here and
see what to find about the topic.

Myself I think I stay with 4.0c and the new sounds. I don't
really remember how the edited ones sounded like before, cause
I did update at once I got the SD1 to have the newest OS and
the new sounds, who I think are similiar as SD1 Plus now?

Happy Playing
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
Page 2 of 2 < 1 2

Moderator:  Admin, Kerry, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online