Sweentech1,
OK, Thanks...it sounds very nice.
Does your HX-1 have aftertouch on the upper & lower?
MAybe I could get one (or something similar)...and use the BK-7m
Thanks Leeboy,
The HX-1 actually has aftertouch availale on the upper and lower manual AND also the pedalboard! (though I believe the 13-note pedal board doesn't support aftertouch both the 20-note and 25-note radiating boards do.)
This makes the HX-1 a very capable controller keyboard. Once you assign a seperate midi channel per keyboard, you can then zone these on the BK-7m using the tone's upper and lower range settings.
HX's are very cheap to buy secondhand nowadays, you would probably pick one up for about £500. If you do decide to buy one, watch out for examples which have had the keyboard action hammered, it is very difficult to get the touch sensitivity control to feel right with very worn examples. Ideally try it out with an external sound module to test this.
Cheers
John
Edited by Sweentech1 (04/18/11 10:15 PM)
_________________________
Roland G-70, FP-4, BK-7m, SonicCell, KC-350 x 2, DS-5 x 2, A300-Pro, Sonar X1 PE, BR1600CD
Yamaha HX-1 System 1, KA-20x2