SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 2 1 2 >
Topic Options
#33638 - 06/10/08 06:40 AM Question: Cable SD1 - PC
Robbe52 Offline
Junior Member

Registered: 01/27/07
Posts: 20
Loc: Germany
Hello,
is there anybody who has a schematic with the pin-connections of a Ketron SD1 to the PC? At least the difference to an ordinary cable would be helpful. Ketron is charging 25€ - quite a lot for a cable and two plugs.
Robert

Top
#33639 - 06/10/08 09:56 AM Re: Question: Cable SD1 - PC
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
If your mail in personal info are right, you have mail.

Happy playing
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#33640 - 06/10/08 11:58 AM Re: Question: Cable SD1 - PC
Robbe52 Offline
Junior Member

Registered: 01/27/07
Posts: 20
Loc: Germany
Thank you very much, a long search has found a happy end.
Keep on rockin'
Robert Wilhelm

Top
#33641 - 06/12/08 02:54 AM Re: Question: Cable SD1 - PC
zzprod Offline
Member

Registered: 08/26/06
Posts: 49
and for the rest of us?

Top
#33642 - 06/12/08 10:39 AM Re: Question: Cable SD1 - PC
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway


I don't remember where I downloaded the image some years ago,
so I can't give credit to the right person.
Anyway, enjoy!

happy Playing
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#33643 - 06/12/08 11:57 AM Re: Question: Cable SD1 - PC
zzprod Offline
Member

Registered: 08/26/06
Posts: 49
thanks.
AJ, is this what's going on inside the cable or is there a modification by Ketron?

Top
#33644 - 06/12/08 12:32 PM Re: Question: Cable SD1 - PC
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
This is as far as I'm familiar with, the correct SD1 to PC cable scheme.
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#33645 - 06/17/08 11:01 AM Re: Question: Cable SD1 - PC
Robbe52 Offline
Junior Member

Registered: 01/27/07
Posts: 20
Loc: Germany
My selfsoldered cable works well. But only with my old ME-PC, didn't get it to work with XP. XP even stops booting and only goes on when I interrupt the connection or switch the keyboard off. Cost me 3,89 €.

Top
#33646 - 06/17/08 12:16 PM Re: Question: Cable SD1 - PC
--Mac Offline
Member

Registered: 05/16/08
Posts: 307
Loc: Chesapeake, Virginia, USA
Quote:
Originally posted by Robbe52:
My selfsoldered cable works well. But only with my old ME-PC, didn't get it to work with XP. XP even stops booting and only goes on when I interrupt the connection or switch the keyboard off. Cost me 3,89 €.



I don't suspect the OS difference here.

Rather more like a Ground Loop problem, likely you also switched PCs when you switched Operating Systems and the new PC is configured differently as to Common and Grounding issues. This is a physical hardwire situation.

First thing I'd try is make sure that the Keyboard and any associated audio gear it may be connected to are plugged into the same physical AC outlet strip as the computer, especially if there are any three prong grounded AC plugs involved on these pieces of equipment. You may have to use groundlift adaptors that break the third prong ground at one of the plugs, not an entirely safe proposition and not legal in some countries, but can isolate the condition.

This is why most MIDI cables use optical isolation, BTW.

If you are adept at electronics, you could devise an optically isolated circuit connect using these pinouts...


Good Luck,


--Mac
_________________________
"Keep listening. Never become so self-important that you can't listen to other players. Live cleanly....Do right....You can improve as a player by improving as a person. It's a duty we owe to ourselves." --John Coltrane

"You don't know what you like, you like what you know. In order to know what you like, you have to know everything." --Branford Marsalis

Top
#33647 - 06/18/08 12:33 AM Re: Question: Cable SD1 - PC
Robbe52 Offline
Junior Member

Registered: 01/27/07
Posts: 20
Loc: Germany
Hallo Mac,
I had thought of a grounding problem as well and tried different solutions. No way. Windows stops booting and continues only when disconnected. When I connect the Keyboard after having booted, the KetronFT freezes when opened. ME works, but I'm disappointed about the uploading speed.
Is anybody running the KetronFT under XP?
Robert

Top
Page 1 of 2 1 2 >

Moderator:  Admin, Kerry, Ketron_AJ, Tonewheeldude 



Help keep Synth Zone Online