Well I've got myself an Apple ipad and loaded it up with this App - Galileo - Professional Organ Emulator for the iPad.
Now all I've got to work out is how to midi connect the ipad to the KN7000 and I should have a whole new set of organ sounds to play with using my keyboard... Anyone got into this area and can offer any pearls of wisdom?

I think you will need a MIDI interface for the iPad like iConnectMIDI1 for iOS devices.
http://www.iconnectivity.com/iConnectMIDI1

Thanks Nigel - Rog

Ok - I've got the midi interface and linked it all up but can't get my KN7000 to play the galileo organ on the i-pad...?

Hi Roger

You will need to set your Technics Midi Out to on, and match the channels to the organ software on your iPad.

Also note that Midi does not carry audio, only Midi Data, therefore you will need to connect the audio out of the iPad to the audio in of the Technics.

Hope this helps

Bill

Right Bill - tomorrow morning's task - cheers...
Just got back from my last gig before Xmas - Rog

This is all I want Galileo Organ App to do with my KN7000 and my Ipad - but it's not happening...anyone any ideas?
http://www.youtube.com/watch?v=6F_4xKT168w

Hi Roger,just been looking at your problem, in my days in retail customer support with Yamaha and Technics products the problems with midi and interface connections was quite common.I have looked at the organ app.and the specs of the KN7 I have a few questions to see if I can figure out what is needed.
1-what type of interface connection are you using?(midi to usb adapter-ipad connector)??
2-How are you connecting the audio output of the ipad?
3-have you made a complete back-up of the KN7 settings so you have a safety net when you start experimenting with the KN's complex midi patches.(give me the good old days of 1 channel at a time)
The first thing to do is after a full back-up of the KN go into the control panel and initial the midi settings,or use the reset disc to reset the midi to factory settings.Next set the R1 output to ch 1,then test to see if you get any sounds??
If the app is set to default general organ channels (the older standards)upper manual ch1,lower manual to ch2, and pedals to ch3 you may have to reset these to upper ch1,lower ch3 so as to match the initial settings of the KN which is R1 ch1,R2 ch2 and left(lower) ch3.
Hope this helps,let me now how you get on? .There may be a way to do this all via USB. both midi and audio but still looking at this option.

Regards John.

Hi Roger

Have a look at this article here as it will probably help you the initial difficulties you are having.

Hope this helps

Bill

Thanks Bill
Hi John - to answer your questions :-
1) Apple lightning to USB adaptor plus USB to midi cable lead keyboard adaptor converter.
2) Hopefully straight out of the Ipad but operated from the KN7000.
3) Midi settings are at Initial as I have never used them before. Not sure how I would do a complete back-up of all my settings anyway...
Tha App - Galileo Organ by Yonac is absolutely fascinating and very wide ranging in it's facilities/options and if you have an Ipad it's very cheap to download at the moment.