SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#40576 - 01/13/04 03:53 AM Re: style converter
aprilla Offline
Member

Registered: 12/10/03
Posts: 56
Loc: Ireland
I didn't get a style converter with the KN2600 and wonder if anyone can guess (or knows) if the one mentioned here for the 7000 would work with it?
I was under the impression that the only PSR to Technics style converter would be the EMC one, and as it's a bit more than I want to spend an alternative is interesting. (still trying to run when I should be crawling)

thanks

Top
#40577 - 01/13/04 04:05 AM Re: style converter
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
Quote:
Originally posted by aprilla:
....I was under the impression that the only PSR to Technics style converter would be the EMC one, and as it's a bit more than I want to spend an alternative is interesting. (still trying to run when I should be crawling)

thanks


The converdisk are just another and special
made EMC version made to work from the KNs.
This disk was first supplied with the KN5000
and then upgraded to convert Yamaha files as
well.
If the disk are supplied for free anymore, I
don't know......

Just carry on running, it make you healthy
they say
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#40578 - 01/13/04 06:41 AM Re: style converter
shcox Offline
Member

Registered: 09/10/03
Posts: 296
Loc: Leesburg, FL USA
Hi Alec,

I guess not since none was supplied.

I'll have to depend on others.

Heather
_________________________
Heather- Leesburg, FL PR54

Top
#40579 - 01/13/04 12:57 PM Re: style converter
rikkisbears Offline
Senior Member

Registered: 12/22/02
Posts: 6020
Loc: NSW,Australia
Hi Mary & Heather,
I don't think style conversion is a function that the kn24/26 and the PR piano's have. My old pr602 didn't have it , wheras it's equivalent in keyboards the KN5 did.
The function is under disk menu on the kn7 ( along with load, save etc) as is called "style conversion).

best wishes
Rikki

[QUOTE]Originally posted by aprilla:
[B]
_________________________
best wishes
Rikki 🧸

Korg PA5X 88 note
SX900
Band in a Box 2022

Top
#40580 - 01/14/04 03:12 AM Re: style converter
thommeke Offline
Junior Member

Registered: 09/25/01
Posts: 10
Loc: holland
would you be so kind to send me the style converter for 6000 6500

i mean not the styleconverter who was on the keyboard
i do have the 5000 and 7000 that was by the keyboard

i also having the styleworks from emc but that goes only till the kn5000

i hope you can help me out

Top
#40581 - 01/14/04 03:34 AM Re: style converter
waterschip Offline
Member

Registered: 03/15/02
Posts: 118
Loc: Amsterdam, the Netherlands
Quote:
Originally posted by thommeke:
i also having the styleworks from emc but that goes only till the kn5000
[/B]


that's the latest version (1.99B). There isn't one for the 6000 and up.
rgds.
Willem

Top
#40582 - 01/14/04 04:17 AM Re: style converter
Gunnar Jonny Online   content
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
thommeke, such programs usually cost money, and to ask
people send you like this is not right.
If you have EMC and want a upgrade, why not go to the
website and buy/download from there?
But as Willem says, it's no version yet to convert down
from KN6000 and up.
GJ
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#40583 - 01/14/04 01:45 PM Re: style converter
rikkisbears Offline
Senior Member

Registered: 12/22/02
Posts: 6020
Loc: NSW,Australia
Hi,
Technote sells a KN7000 conversion disk that converts
some of the newer keyboards, including psrs
( only works in the KN7 keyboard as far as I'm aware) http://www.technote.com/productdetails.asp?prodid=10238&returnto=/products.asp?catid=43
These disks don't appear to be able to be backed up in a P.C. so anyone who owns one, look after it well ( in short, as far as I'm aware , they can't be copied on P.C.'s)
I would imagine the same goes for the KN6/6500 version?

If you actually have EMC's stylework program, you can convert it to the KN5000 and use the style in your kn7000 keyboard.

If it's mainly psr styles you're wanting to convert there are other ways of doing them, but would require a lot more work than doi+n+g it with the Style conversion disks.

Yamaha styles are basically a midifile with a .sty extension. Change that extension to .mid and you have a midifile.
From there you could load the midifile into your sequencer, and use the seq. to style function in your kn7 keyboard.

There are a couple of problems though.
1.Yamaha drums are xg, so some of the drum sounds would need to be corrected.
2.Yamaha styles are based on a major7th chord
so there'd be a lot of "b's" that you'd either have to delete or change to a "c".

A fair bit of work.

If you've got any questions , I'd be happy to try & help.
I've got a bit of a styles group going at http://groups.yahoo.com/group/kn7000styles/

best wishes
Rikki

Quote:
Originally posted by thommeke:
would you be so kind to send me the style converter for 6000 6500

i mean not the styleconverter who was on the keyboard
i do have the 5000 and 7000 that was by the keyboard

i also having the styleworks from emc but that goes only till the kn5000

i hope you can help me out

_________________________
best wishes
Rikki 🧸

Korg PA5X 88 note
SX900
Band in a Box 2022

Top
#40584 - 01/14/04 04:25 PM Re: style converter
aprilla Offline
Member

Registered: 12/10/03
Posts: 56
Loc: Ireland
That's interesting Rikki, thanks for the explanation.
I have gone as far as loading a midi file and peeking at it in the KN2600 sequencer and have an inkling of how maybe parts could be copied and pasted to eventually end up with all the 'style' bits (and pads too) to tweak and save... but I'm only at a kindof a 'hmmm if I do that' stage, I'm not trying seriously yet. Perhaps I should be doing that instead of reading posts! The KN2600 doesn't have a seq to style feature that I know of, but where there's a will....

CDs
I've been using computers since the Commodore Amiga, great for music in its day *sigh* anyway, my experience with floppies was/is great, only had 3 or 4 fail on me ever, and because they hold so little lost only small amounts of data. CDs I find very touchy. I have had many many not work, or be particular on what CD reader they will work on, oddly enough, and it doesn't seem to matter what kind I use. Cheap or expensive, I find them equally unpredictable. So much so that I always make 2 copies at a time now.

I had been looking forward to the little USB 'pens', or whatever they're called, to get lower in price to switch to them but might consider these SD cards now that I have used them with the keyboard, I believe they are quite reliable.

maryo

Top
#40585 - 01/14/04 04:40 PM Re: style converter
rikkisbears Offline
Senior Member

Registered: 12/22/02
Posts: 6020
Loc: NSW,Australia
Hi Mary,
if you have this function, it would be in the composer section.

sequencer to style.

best wishes
Rikki

[QUOTE]Originally posted by aprilla:
[
_________________________
best wishes
Rikki 🧸

Korg PA5X 88 note
SX900
Band in a Box 2022

Top
Page 2 of 2 < 1 2

Moderator:  Admin 



Help keep Synth Zone Online