SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#430868 - 04/18/17 11:38 AM Re: New QSC Powered Speakers Announced... K.2 Series [Re: Bill Lewis]
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Originally Posted By Bill Lewis
2000 watts in the 8" model. That speaker must be made of some secret materials to not blow apart or melt.
As,for DB's their new line only 1 higher than the older models.
I think for bigger venues just adding more speakers would increase coverage and sound quality better,than maxing out one or two speakers. More speaker area,to move more air.


might be good as a pair of tops but you will need subs also...


Edited by Dnj (04/18/17 11:39 AM)

Top
#430870 - 04/18/17 11:44 AM Re: New QSC Powered Speakers Announced... K.2 Series [Re: shueymusic]
Bill Lewis Offline
Senior Member

Registered: 11/12/08
Posts: 2445
Loc: Bluffton/Hilton Head SC USA
Thats the way to do it if you don't mind moving lots of gear. Put them over some subs . Lots of guys looking for shortcuts and just bringing the minimal amount of gear for gigs but to do it right you need more speakers ( subs )
_________________________
Bill in SC --- Roland BK9 (2) Roland BK7M, Roland PK5 Pedals, Roland FP90, Roland CM30 (2), JBL Eon Ones (2) JBL 610 Monitor, Behringer Sub, EV mics, Apple iPad (2) Behringer DJ mixer

Top
#430871 - 04/18/17 11:51 AM Re: New QSC Powered Speakers Announced... K.2 Series [Re: shueymusic]
mirza Offline
Senior Member

Registered: 11/15/01
Posts: 1314
Loc: london,ontario.canada
Actually now would be a nice time to get original K's which are not that bad.
_________________________
MIKIMIKI

TYROS 5,BEHRINGER X32PRODUCER,YAMAHA DSR112,JBL PRX618s XLF,EV ZLX12p,SENNHEISER E945,....ETC

Top
#430876 - 04/18/17 05:50 PM Re: New QSC Powered Speakers Announced... K.2 Series [Re: Fran Carango]
Uncle Dave Offline
Senior Member

Registered: 12/01/99
Posts: 12800
Loc: Penn Yan, NY
Originally Posted By Fran Carango
Do you think your K amp is 10 times more powerful than one of my Cubes?

Nope, just twice, but you knew that already. Your cubes have lots of "ooomph", but the bass is tighter in my K10s. The horn is also more efficient, and has a wider coverage in the QSC.
_________________________
No longer monitoring this forum. Please visit www.daveboydmusic.com for contact info

Top
#430878 - 04/18/17 11:14 PM Re: New QSC Powered Speakers Announced... K.2 Series [Re: shueymusic]
shueymusic Offline
Member

Registered: 04/27/11
Posts: 648
Loc: Lebanon, PA
The QSC K.2 will be the replacement of the now called Legacy K Series. They only dropped by $100 now. And I can see that number dropping more in the future to compete with other speaker lines. Still a great speaker!

This means that the KW models will have an upgrade soon... I predict.

The K8.2 will shine as a compact monitor speaker! Or as a 105° coverage pattern top speaker with a sub to fill out the 100 hz and below for bass and kick. A great system as a 2.1 configuration. For around $2600, this would be a more sold system than the Bose L2. Weight would be an issue at 90 lbs on the sub and 27 lbs each on the K8.2... but it would sound bigger than it would look.
_________________________
~Johnathan
"The Shueys"
www.shueymusic.com
Yamaha Genos - RCF M20x - RCF HD10A (Stereo) - Jupiter Pocket Trumpet - Sennheiser e935 - Neumann KMS-104 plus-N

Top
#430894 - 04/19/17 09:06 AM Re: New QSC Powered Speakers Announced... K.2 Series [Re: shueymusic]
frankieve Offline
Senior Member

Registered: 11/24/99
Posts: 1675
Loc: Milford, CT, USA
SPL is what matters when it comes to a speaker, not wattage, a 350 watt speaker can play just as loud as a 1000 watt, it depends on efficiency of the speaker.

Also the sound quality, and natural eq curve of the speaker is the other major quality that has to be in the mix
_________________________
www.AudioProCT.com
Frank@AudioProCT.com

Top
#430898 - 04/19/17 09:52 AM Re: New QSC Powered Speakers Announced... K.2 Series [Re: frankieve]
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703
Originally Posted By frankieve
SPL is what matters when it comes to a speaker, not wattage, a 350 watt speaker can play just as loud as a 1000 watt, it depends on efficiency of the speaker.

Also the sound quality, and natural eq curve of the speaker is the other major quality that has to be in the mix



Ditto Frank

Top
#431041 - 04/24/17 11:08 PM Re: New QSC Powered Speakers Announced... K.2 Series [Re: Dnj]
guitpic1 Offline
Senior Member

Registered: 04/16/14
Posts: 1950
Loc: Missouri
_________________________
It’s all about the learning

Top
Page 2 of 2 < 1 2

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online