NO! It's a little bit tricky. First, Audya have to start without INIT or another error on display! So your HDD must be OK. When you hear sound by pressing any key after full start (audio resources are OK), starting style work too ...
... and when after some period (~ 1 minute) Audya stops generating sound and "freeze" - It seems to be the problem with USB chip on board (probably damaged with electrostatics).
Internally Audya "think" are connected via USB to computer and stops working.
Solution is put in pins 1 and 4 100Ohm resistor (USB connector on back side). More on this diagram:
You can make this special cable (from old USB printer cable by cutting USB PC connector) or buying USB male conector
https://www.taydaelectronics.com/usb-type-b-female-connector-5790.html and put 100Ohm resistor on it.
Otherwise USB connection with PC work normally (standart printer USB cable) so don't worry about function.
With this small modified connector Audya work (playing) without sound interuption and NO FREEZE!
Hope will help you too ... (Another solution I thing is only new Audyas motherboard)
Edited by country_man (05/23/19 12:34 AM)
_________________________
Nord Stage 2, Ketron SD90, Audya 4+5, SD1000, Roland E-A7, SC8820, Korg microarranger, Alesis Vortex, TC Helicon VL2, Soundcraft Ui12, JBL EON ONE (2), RCF312A
Previous Topic
Index