Hi - when using the pedalboards with many switches (such as the Behringer mentioned in this thread, or the Yamaha MFC10, I have a question. If using the "Function" to edit the foot controllers, you can (for each of the 3 footswitches you can plug in) controller what function it does, AND whether that function applies to L, R1, R2, and/or R3 in any combination.

I do this for my sustain pedal - for example, if I have a Piano sound in L and a sax in R1, I'll set it to have the Sustain pedal (#1 in my case) affect L but not affect R1. This can
be memorized into a Registration too.

Can this same thing be done with the bigger MIDI-based footswitches such as Yamaha MFC10 or the big Behringer? I can't see on the programming page where you could have a footswitch on one of these affect (or not affect) L, R1/2/3 separately.

I was thinking of replacing my 3 separate pedals (plugged into pedal inputs 1, 2 and 3) with say a Yamaha MFC10. However, then I may not be able to set one of its switches to Sustain AND have it affect only the part(s) (L/R1/R2/R3) that I want.