When I'm surf trough my reg. bank( selecting some bank,press 'Edit' button to see what is inside) after time to time i have pop up message:
'Registration backup memory full
any changes will not be stored in memory
turn the power off and on again,or save reg.data'

I dont understand this ,because I'm not change reg. ,only select.

I'm I doing somethings wrong,because this message is verry irritant in live situations?!

THANKS !


[This message has been edited by Matteo (edited 09-11-2005).]

This is not an unusual message, and some of the tech folks belive it's because the keyboard is doing other things at the time the registration edit is being called up. You may want to back up all your data and do a system restoration, which solves a lot of these types of problems.

Good Luck,

Gary

------------------
Travlin' Easy

Gary,did you mean: Function/Utility/System reset, then 'System setup files' or Factory reset ?

I did both but still have the same problem

Mattaeo,

A full factory restoration through the function page is the best way to go, but you will loose all your data. In order to do this, you must place a check-mark in each box, then press the "D" key to bring the keyboard back to where it was when it came out of the box.

If this doesn't solve the problem, then you may wish to do a complete system check. You can find the details on this at the PSR Tutorial. Here are the basics:

1. Power off
2. press C2# - F2 - G2# (all three together) and while keeping them depressed,
3. switch the power on.
You'll see the word "TEST" on the display

With Tempo - / + you can go to the test you want to perform. Start/Stop will start the test. Wait till a test is done!


------------------
Travlin' Easy

Gary I do everything,go trough Test page and do the test...seems everything OK ,and stil have the same problem!?( have PSR1500)
Anyway, BIG thanks for your help!!

[This message has been edited by Matteo (edited 09-15-2005).]

[This message has been edited by Matteo (edited 09-15-2005).]