Originally posted by lukitoh:
...For DGX300, you cannot choose a different voice for the bass section. In fact you can only choose from a combinations (pre-selected) split voices - i.e. the factory already pre-assign a bass voice and piano voice combination and you cannot change it. What if you want to change the piano voice with a brass sound while maintaining the same left hand bass voice - well, you cannot !!! However, I think you can change them independently for DGX202 and PSR292 - but then you are missing the registration memory capabilities.
One of our Illustrious dealers came up with this way to make the split feature on the DGX300/500 a little more versatile
Creating Custom Split Voices on the DGX300/500 While the DGX is not designed to feature custom split voices, using the simple workaround steps below will enable the unit to performing this feature.
1) Press the [SPLIT] button.
2) Choose one of the Split Voices between 113 and 122. The Split Voice with the best left hand voice should be chosen.
3) Press the [DUAL] button.
4) Press the [vSETTING] button once. The display should indicate 'M.VOLUME'.
5) Press the [0] (zero) button 3 times. This will reduce the 'Main Voice' volume to zero leaving only the 'Dual Voice' on the right hand side of the split. This step is optional.
6) Press the [vSETTING] button six times. The display should appear to be the normal voice select display.
7) Choose the new right hand voice by pressing the [+/YES], [-/NO] or the voice can be accessed directly by entering the number directly using the numeric keypad.
8) Adjust other 'Dual Voice' parameters if necessary as described on page 27 of the Owners Manual.
This custom split can now be saved as part of a registration memory.
Steve Deming
Yamaha Customer Support
[This message has been edited by YamahaUS1 (edited 07-08-2003).]