Hi Tommy,
Thanks for posting the link. It is very important to note here that this link is to the German distributor of GEM products and therefore the operating systems are designed for units sold in that market. For the most part this means some different sounds and/or presets, different style presets, etc. than what is used for the US market.
NOTE 1:The Genesys Pro S operating system is NOT compatible with the original Genesys SP or Genesys Pro so if you don't have the new Genesys Pro
S, do not try to install this O/S.
NOTE 2:The Promega 2 and 3 operating system update requires opening up the units and changing a jumper on the main board during the installation. This is best left to a qualified service technician.
NOTE 3, TO CUSTOMERS IN THE US:If you desire the latest operation system for your GEM instrument, it is incredibly easy to receive the proper O/S direct from the Generalmusic corporate offices in Chicago, IL. Either call 630-766-8230 and request an O/S disk or contact me via my e-mail address in my profile and I will see that an O/S disk is sent to you.
These operating systems are quite large and it is much more dependable to receive a CD with a known good O/S than it is to try to download the file and hope that no glitches occurred during the transfer.
Best Regards,
Dave
------------------
Wm. David McMahan
Nat'l Product and Support Manager
Generalmusic USA
GEM Community Forums [This message has been edited by WDMcM (edited 06-24-2005).]