SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#28087 - 08/15/01 09:47 AM XP-80 technical Question
stillme Offline
Member

Registered: 07/30/01
Posts: 152
Loc: Michigan/US
Okay,
I've been having some problems with the disk drive on my xp. Does anyone know if there is a way to replace the disk drive without having to send the keyboard in to get repaired? Thanks.

Top
#28088 - 08/16/01 05:28 AM Re: XP-80 technical Question
stigf Offline
Member

Registered: 11/19/99
Posts: 145
Loc: Tromsų, Norway
Hi

Let me start by saying that if you try to repair or open your XP, it is on your own responsibility! If you still have warranty, you loose it by opening the XP..

When that is said, the XP is fairly easy to open. Place the XP upside down; be careful with the bend/modulation stick! Remove the screws in the bottom of the XP, and remove the bottom plate. Remember to unplug the power before opening!!

The disk drive is now clearly visible (if my memory is correct). The disk drive appears to be of the standard IDE type used in your PC.. To be on the safe side, I would order an original Roland disk-drive. Loosen the diskdrive and the cables, and substitute it with a new one!

I have NOT done this myself, but I have opened the XP-60 once, and both changing the internal battery and the disk-drive appear to be quite easy.. The XP is internally very well constructed, and has very easy access to most components..

But be careful anyway; having somone assisting you is not a bad idea. Maybe you know someone with experience from repairing electric/electronic devices..

Hope this was helpful to you..

Stig

Top
#28089 - 08/18/01 06:06 PM Re: XP-80 technical Question
stillme Offline
Member

Registered: 07/30/01
Posts: 152
Loc: Michigan/US
Okay, that helps a lot! That was just the answer I was looking for. I don't have a warranty because I bought it used off of ebay in MINT condition. (supposedly) It was quite a bummer when I found out that the disk drive was having those problems. I guess that's a risk from buying used. Other than that, everything is in tip top condition. Thanks!

Top
#28090 - 08/21/01 04:22 AM Re: XP-80 technical Question
stigf Offline
Member

Registered: 11/19/99
Posts: 145
Loc: Tromsų, Norway
Hi

I would really like to hear when you get it done.. Interesting to know if it went well, if you encountered any problems etc..

Stig

Top
#28091 - 08/22/01 01:00 PM Re: XP-80 technical Question
stillme Offline
Member

Registered: 07/30/01
Posts: 152
Loc: Michigan/US
No prob. I'll let you know.

Top

Moderator:  Admin 



Help keep Synth Zone Online