SYNTH ZONE
Visit The Bar For Casual Discussion
Page 2 of 2 < 1 2
Topic Options
#281253 - 02/12/10 10:45 AM Re: Podium PP802A vs. QSC K8
frankieve Offline
Senior Member

Registered: 11/24/99
Posts: 1675
Loc: Milford, CT, USA
_________________________
www.AudioProCT.com
Frank@AudioProCT.com

Top
#281254 - 02/12/10 11:04 AM Re: Podium PP802A vs. QSC K8
Diki Offline


Registered: 04/25/05
Posts: 14277
Loc: NW Florida
Actually got a pair of those, Frank. Mount them on mike stands, put them at the corners of my G70, run stereo from the output of my G70 to both, then take one aux from the band's mixer to add in vocals and anything else I need, they keep up pretty well with a full-on live band (though just one is pushing it for a really loud band!).

Very little low end, but that's what I like when the subs are pumping! Highly recommended, albeit a tad pricey...
_________________________
An arranger is just a tool. What matters is what you build with it..!

Top
#281255 - 02/12/10 11:21 AM Re: Podium PP802A vs. QSC K8
leezone Offline
Senior Member

Registered: 06/24/08
Posts: 3131
Diki,

would you say you'd get a better sound with 1 Podium 802 8" vs. 2 of these Mackies 5"?
i do know you get mono only w/802's

also...
you could buy 3 of the 802's for the price of ONLY 1 Mackie

Top
#281256 - 02/12/10 02:10 PM Re: Podium PP802A vs. QSC K8
Diki Offline


Registered: 04/25/05
Posts: 14277
Loc: NW Florida
Well, if stereo makes no difference... No, sorry, I can't help myself! Stereo makes a HUGE difference

Primarily, for me, it's about the size of the things. Put up a couple of Podium's in the sweet spot on the corners, and you are almost obscured, compared to the Mackie's... I wouldn't be at all surprised if the Podium's get louder and fuller, but getting the Mackie's in close does the job without taking up any more space onstage than I would without them. Not so the Podium's. The Mackie's are DESIGNED to go on a mike stand, it would be easy if I wanted to make an attachment and mount them on the stand itself, those Podium's are too big for that, so you've got to use speaker stands (much larger).

I like the easy to get to front panel controls, all the little extras (phantom, pass through jacks, RCA, 1/4"/XLR combo jacks, easy EQ access) and the fact that, should it die, my local dealer takes care of it and I get a floor unit to cover me while my repair is sorted out (haven't needed that yet!). I'm afraid that, until the Podium's are widely available locally, I won't touch them, but primarily, it's about size.

Having the controls on the front (where I can get to them while I play) having three band EQ, having four different sets of inputs, including stereo RCA, having a detachable cord (what's with THAT?) and having a frequency response DESIGNED to roll off the low end all count in the Mackie's favor, IMO.

But I wouldn't discourage you from trying the Podium's if you want to just try them out. On paper, they look fine. Crank them to the max, though, to see what they can and can't do...
http://www.mackie.com/products/srm150/
http://www.podiumproaudio.com/podiumproaudioproduct/poweredspeakers.html
_________________________
An arranger is just a tool. What matters is what you build with it..!

Top
Page 2 of 2 < 1 2

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online