![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28654 - 11/22/00 07:15 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 07/14/00
Posts: 307
Loc: Peterborough,Cambridgeshire,UK
|
Does a old JV880 count still? It's had an orchestra board fitted, and even has cards in it's PCM slot (a piano card), and a in it's Data card slot (rich sound collection 2). I've a friend who also uses a 880 out live, with the pop baord fitted.
I've a JD990, which is a serious bit of kit. It can read JV80 cards, but everyone went the 1080 route. With the 990., and the 880, I think I've a 1080 and some.
That's about all I've got to say...
------------------ The Sonic Energy Authority - a sound investment
_________________________
The Sonic Energy Authority - a sound investment
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28656 - 11/23/00 10:58 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 08/19/99
Posts: 35
Loc: Farncombe
|
Ive got a XV5080 + a JD990, the 2 best modules in the universe IMHO.
The 990 is still my favorite. It is just so raw, but to me is also capable of incredible warmth for a rompler. Also, I still find it quicker to choose from 195 waveforms rather than bloody thousands. The editing is faster, but it aint got the polyphony, multitimbral power, range of effects the XV has. Filters are more "analogue" as well, ie they dont cause permanent ear damage when you sweep them at maximum settings! The filters are imho better than the JP8000.
The XV5080 is great at smooth sounds and does sound clean as a whistle. Effects are the dogs, as is the ability to chuck wavs at it.
Anyway I could go on but I wont!
Cheers
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28659 - 11/23/00 10:27 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 11/23/00
Posts: 10
Loc: Venezuela
|
Hi, I'm Popo, Caracas,Venezuela. I own an XV-88, recently bought it, but I got a little trouble with it...I know this is not the topic, but I'll be very happy if someone who knows(owns) this synth could give me a little help(just email me), since this is a Roland community people reading this. Besides that, I'm very happy with it, I have it connected to a Tascam US-428 and then to a Mac G4, running Cubase VST/4.1, hoping to get Digital Performer 2.7 soon. (I have a Topic posted titled "XV-88 Patch Finder trouble" in this Forum)
[This message has been edited by popillo (edited 11-23-2000).]
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28660 - 11/24/00 03:12 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 03/09/99
Posts: 165
Loc: São Paulo (SP)/Brazil
|
Hello, JV/XP/XV users...
I´m Mgomes, São Paulo, Brazil. I´m using JV1010, so, the 1st board is, of course, Session (very good) and the second is Experience II. Also I have the discontinued Dance board. Maybe I get a bigger JV or XP to fit all boards at same time. Right now the XVs are too expensive ...
Mgomes
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28665 - 11/24/00 08:54 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 01/27/01
Posts: 217
Loc: Lexington, KY USA
|
KF: I figured it was something as sophisticated and meaningful as that. I think this makes 12 or so. I'm feeling less "junior" every day. I can even go to the bathroom all by myself now! ;-)
As far as sequencers - I've manuscripted for so long it's hard to imagine constructing music any other way. My computer software just instantly connects writing to performance. Otherwise, I'm still writing the same as I did in graduate school back in 19-aught-whatever. (Of course, I couldn't play the stuff then either!)
In any case, if one has a computer, it'll do sequencing with cheap (even free) software - performance/recorded, or written. I guess the only downside (there may be others, but I'm completely ignorant on the subject) is that my dependence on computers dictates I bring a laptop to gigs.
Ah...there's another learning curve yet to be addressed!
_________________________
"The problem with the world is that the ignorant are cock-sure, whereas the intelligent are full of doubt." - Bertrand Russell
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28674 - 11/25/00 06:08 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 01/27/01
Posts: 217
Loc: Lexington, KY USA
|
KF: I did get the impression (belatedly) from a post on another forum that you had done some computer work. Like you, I am also too cheap to purchase a laptop, but since I'm a high school tech resource teacher by day, I check one out from there and bring it to gigs. (I'm relentlessly cheap!)
Computers are kind of a pain at gigs, so you're right, it'd be nice to just stick a disk into a module or synth. Of course, having the computer on-site makes it possible to tweek there . . .
By the way, since you have Noteworthy Composer experience (y'know, for the money, it's pretty good - did I mention how cheap I am?) - you have a guess as to how well it'll work with a MOTU MicroExpress? The folks at MOTU basically told me to "get over it" - the MicroExpress drivers will work with anything! I'm not so sure, but we'll know more by Wednesday!
The impression I'm getting is that the JV-1010 has every bit as much voice breadth as many of Roland's more expensive modules and synths. Did I get lucky?
_________________________
"The problem with the world is that the ignorant are cock-sure, whereas the intelligent are full of doubt." - Bertrand Russell
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28677 - 11/26/00 10:55 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 01/27/01
Posts: 217
Loc: Lexington, KY USA
|
EPU: You're absolutely right - MIDI being a serial protocol, the hardware can be dead slow and the module would still be the limiting factor. That is, of course, if you're just running the MIDI files, and not the monster application you used to generate them! (I notice Cakewalk Pro 9.0 requires a bunch of memory and processor speed.)
Of course, in my case, eBay just can't beat free . . .
_________________________
"The problem with the world is that the ignorant are cock-sure, whereas the intelligent are full of doubt." - Bertrand Russell
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28678 - 11/26/00 11:48 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 05/20/00
Posts: 51
Loc: London, England
|
Hello, I'm Martin, and I'm an....
... old bass player who got into home recording a couple of years ago with a Roland VS880 and VS1680.
I use a Roland XP60 for a lot of my sequencing work.
I have the Vintage Synth; Keyboards of 60s and 70s; Bass and Drums; Orchestral II and Session expansion cards.
I think the XP60 is a marvellous machine, but for someone who has never had the slighest grasp on synthesised music in the past, I still find it INCREDIBLY user unfriendly.
But the sounds.... phew. They are worth (just) the hours of frustration.
This BBS has the potential to be wonderfully helpful: Epu and some of you other guys have already given me good advice in the past, and having finally dragged myself half-way up the learning curve I'd be delighted to pass some of it on (assuming there is anyone in the world who knows less than I do...)
All the best,
Martin
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28679 - 11/26/00 10:40 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 06/24/00
Posts: 11
Loc: zalau salaj romania
|
I am Sergiu,and I recently got in the producing of Dance music(hopefully with succes).I used to own an xp 60,but I exchanged it with an xp30.I also have the Latin and the Vocals expantions,but I an not really satisfied,especially with the Vocals. It seems to me like a waste of rom,the only natural sounding waves being religious phrazes and unuseable for contemporary music.I have a computer,windows millenium,a SB Live,Cubase vst 24,Gigasampler,which I have not used yet. Please give me some reviews on the Hip hop and Sfx board.
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28680 - 11/27/00 04:33 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 02/20/00
Posts: 466
|
The Hip-Hop board is great! Yes, there are a lot of loops, but the Rhodes, Basses, SFX, Guitar FX, etc. really make up for it. The drums are also superb. IMO, the Hip-Hop board is a must have. Now Sergiu, how is the Latin Expansion board? I'm not too interested in the loops, but the huge amount of guitars and brass makes me want to get it. How are the quality of the new guitars and brass? How is the quality of the drums and rhythm sets? The Infamous EPU. ![](http://www.synthworld.com/ubbs/biggrin.gif)
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28682 - 11/27/00 03:41 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 01/27/01
Posts: 217
Loc: Lexington, KY USA
|
Martin: I tend to gravitate to anyone who starts with ". . and I'm an old . . . " Next thing you know it we'll be trading nostalgic stories about the Great War . . .
I can't remember - did you (or somebody) post something on the Orchestral II? You satisfied with it? How does it compare to the first orchestral expansion board? I'm in the process of giving my wife a Christmas list, and considering my interests in orchestral instruments, one or the other is going on it. (Any port in a storm, as I always say!)
Wayne: It was a Yamaha PSR280 that got me into this stuff. For a $200+ keyboard, it's amazing - I used it in two performances with laptop-delivered sequences, and it sounded quite good with my guitar and voice! It's a shame that 10 times as much money doesn't get 10 times the tones and realism. Don't get me wrong - I'm glad I'm expanding my palate - but it raised unrealistic expectations about how much I'd have to pay for it all!
I'm still using the Yamaha, actually . . .
_________________________
"The problem with the world is that the ignorant are cock-sure, whereas the intelligent are full of doubt." - Bertrand Russell
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28683 - 11/27/00 05:14 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 06/24/00
Posts: 11
Loc: zalau salaj romania
|
Epu,I got this board not knowing it is in fact called World Collection Latin.I thought it is called Latino,like in the Gloria Estefan stuff,so at start the great ammount of ethnical loops(salsa,etc)and the clear orientation towards real mariachi music dissapointed me.But as I listened more and more to the sounds I realised I could use those in dance music.The most part of it consists of percussion sounds and loops,as you know,and those are great at least compared to the ones I v heard and used before. The trumpet sounds are the best I have heard,and the brass section as well,but not the saxes which suck.Too many guitars in my opinion,but good.Some accordions,and vocals which are again great,you know fiesta arriba ole hiiha aso.If you use trumpet and percussion alot,you want it. I will keep it for that reaso.
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28684 - 11/28/00 11:17 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 05/20/00
Posts: 51
Loc: London, England
|
Hi OldSchool,
Yes, I have Orchestral 2. Personally, I love it. But I can't compare it to 1 whihc I;ve never heard. I went straight for 2 because I really wanted all the Celtic and other odd sounds it contains.
Someone here criticised it for that - which is fair enough - those sounds probably should live on a World Sounds card (how many orchestras have you heard featuring a bhodrum, aoelian harp and tin whistle?).
I love those sounds, and also the beautiful strings, brass, woodwinds and 'traditional' orhestral percussion sounds whihc abound on this card.
But in truth you should really get an opinion from someone who is familiar with both cards...
All the best.
Martin
(P.S. what did you do in the war?)
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28685 - 11/28/00 12:46 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 02/20/00
Posts: 466
|
I may get a lot of disagrees on this one, but I was heavily dissapointed with the Orch II. The story I was looking all over New York for an Orch I. At the time (Sept.), no one seemed to be stocking them anymore. A guy at Sam Ash told me that the Orch II was better for the taking anyway as the sounds were recorded at 48khz which allowed more headroom than the original orch. He also said the sounds were richer and that this board had more variety. I took it home and was immediately dissapointed. There is more headroom, but the sounds sounded to "sampled" to me and fake. Also, heavy vibrato was included in the samples (which can't be taken out) and that upset me a little more. Then next day, I discovered that the store had a used Orch I board in their display XV88. This board is a killer. The strings sound so much better and IMO, had a much better variety. It's hard to imagine that the Orch I board sounds better than the Orch II considering that the Orch I card debuted back in 1992. If you already have the Orch I, I would say that the Orch II board makes a great compliment. This can be seen as you'll see patches like "Oboe 5-8", where the Orch I board has "Oboe 1-4". Other people disagree with me on this. if you are into the Celtic sounds, then go for the Orch II board, IMO, there are too many celtic sounds. Perhaps they should have included these kind of sounds on a "World II" card. BTW, there are some great Celtic sounds on the new Patch bank for the XV series (which are also compatible with the JV/XP series) from the Roland web site. All in all, the bank they offer sounds great! The Infamous EPU. ![](http://www.synthworld.com/ubbs/biggrin.gif)
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28687 - 11/28/00 04:07 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 02/20/00
Posts: 466
|
Well, headroom can be thought of (simplistcly) as a wider range of frequency and dynamics one could use to record a sound. Think of it as a limited amount of dimensional space one could put a sound in (again this is a simple explanation). Imagine a 3D space that is 44,100 cubic feet as opposed to one that was 48,000 cubic feet. The larger space would allow you to capture more of the sounds artifacts and resonance - more character. Just becuase something was recorded with more headroom doesn't mean that it will always sound better. There is less headroom on the Orch. I board, but there is also a larger variety of sounds that are related to the Orchestra. Also, while there is more headroom on the Orch II board, there are less Solo strings and as I said earlier, the strings on the Orch II card have a more prominent vibrato which is a little more irritating to me. Remember, this is just my opinion. You should really try to audition them yourself as I did to come to that conclusion. You may find that you end up believing opposite of what I do. The Infamous EPU. ![](http://www.synthworld.com/ubbs/biggrin.gif)
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28688 - 11/28/00 07:13 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 05/14/00
Posts: 84
Loc: XV-5080
|
Hi all,
I'm using a Roland A-90Ex, an A-70Ex (both with VE-RD1's), a MBD-1 bass module, an XV-5080 (with Orch II, Keys 60's/70's, Piano, Vintage Synth, SRX 1 & 2 boards, various sample CD-ROMs), a set of V-Drums (TD-10 and TD-8) and various older rack synths (Alesis QSR, Yamaha TX802) and effects units.
I just got a Roland VS-1880, which I'm learning to use.
I guess you could say I like Roland gear...
See ya, Chris
[This message has been edited by feefer (edited 11-28-2000).]
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28689 - 11/29/00 02:04 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 11/09/00
Posts: 4
Loc: Brisbane, Queensland, Australi...
|
Hello, I'm Joel from Australia. I have recently bought an XV-88, which I am very happy with. I still don't know half the stuff it can do, but I'm learning. The onboard sounds are awesome, although the D-Beam is still confusing me. Anyway, See you later.
[This message has been edited by arnold (edited 11-29-2000).]
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28698 - 12/05/00 09:39 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 12/05/00
Posts: 9
|
Hi, this is NK. I have an XP-80 with Hip-Hop and Techno expansion, and a XV-5080 with Orc.I, World, Latin and Asia expansion. Just know a little about MIDI and do some music-sequencing work as well. I am also a part-time lecturer in a music college.
Recently, after I did some demo on the XP-80 to the students in the class, 7 students each bought an XP-80 with 2 exp card! They all thought it sounded excellent, if compared to the Korg Triton. Of course it would be better off with a XV-series, but XV-series is yet to release a workstation-synth like the XP-80. Anybody has got any idea when will ROLAND release them?
I personally think that in terms of sound quality, Roland is the best. The only thing that I discovered is, compare the XP-80 to the JV-1080 or similar, using the same sound for output, the module seems to have more depth and warm where as the XP is slightly more bright and "a little bit" too sharp.
Last, the XP-80 also has this problem of note "choking" when you have more than 8 MIDI event falling on the same beat clock. It happened to my unit. has anybody experienced this?
------------------ dEjAzz, the ROLAND fReak
_________________________
dEjAzz, the ROLAND fReak
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28699 - 12/05/00 10:36 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 11/26/99
Posts: 241
Loc: Austin, Texas, U.S.A.
|
Hi, this is Paul Ip from Texas.
Over the years, I have used quite a bit of Roland equipment. Currently I have XP30 synth with Asian and Orchestral II expansion, G1000 arranger, TD-8 (V-Drum module) with PD-120 V-pad, HPD-15 Handsonic, GI-10 guitar-to-MIDI interface, KC-500 keyboard amps, VS-880V2 recorder, V-5 VideoCanvas video mixer, PK-5 pedal board and various Roland keyboard and electronic drum accessories/pedals. Roland products are generally quite good in quality (to me).
Paul Ip from Texas
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28706 - 12/23/00 07:42 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 06/29/99
Posts: 37
Loc: Campinas, SP, Brazil
|
Hi, EPU.
I´m not new in the synth zone... I´m from Brazil like Mgomes, a dance producer and my gears are oriented to techno and dance music.
I have seen your topics about 2 years...
I got a XP-80 with Dance and Orchestral 01 expansions, JX-305, Midi patcher A-880, SC-88 pro, MC-50 sequencer, S-330 sampler, MS-1 Sampler, Korg M3-R.
I´m a Roland lover, like you...
I´m planning to increase my set with a Techno or Hip-Hop exp. Could you help-me.
I need sounds to make Drum´n´Bass and techno songs...
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28707 - 12/25/00 08:46 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 12/25/00
Posts: 6
Loc: Austin, TX,USA
|
I have an XP-80 with Asia, World, Vocal and Session plugged into it.
I have an 2080 with Pop, TEckno, SuperSounds, Orchestra 1, Brass_Drums and HipHop cards plugged into it.
My also have a SPD-20 (I'm a percussionist at heart).
My biggest issues is figuring out how to get a library going of all the patches from a central place. Not sure what software to use. Still fumbling with software on a PC.
I've tried climbing the Cubase mountain but I haven't really made friends with that software yet. Suggestions? Emagic better?
Frankly, my most productive tool is Acid Pro for compositions - go figure. Someday I'll get a tip on the best path for midi sequencing (other then the build in seq. in the xp80 which is dead simple to use).
Tom Parish
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28708 - 12/26/00 09:07 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Anonymous
Unregistered
|
heh... all i've got is a lowly xp-10 and m-bd1. i feel so inadequate!! ![](http://www.synthworld.com/ubbs/wink.gif) soundfonts help me deal with the trauma, tho... i'd be interested in hearing from anyone who feels the way i do... namely, that developing truly authentic-sounding, i-thought-that-was-a-live-drummer percussion sequences is absolutely critical. i didn't use the m-bd1 on most of the songs on our first cd (URL in .sig), but did still try to get it as realistic as possible. (of course, there's not much you can do with an sr-16...) i'm sure there are tips and tricks i haven't stumbled upon yet, and would love to know how to achieve some things... like, for instance, getting a decent roll out of the toms. no matter what i try, it invariably ends up sounding like a collection of individual hits in rapid succession... there's gotta be a way to get it sounding better than that. any ideas, or pointers to sites addressing this area of sequencing, would be much appreciated. l8r mitch ------------------ http://www.mp3.com/speedlimit35
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28711 - 01/01/01 05:16 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 08/19/99
Posts: 35
Loc: Farncombe
|
Oh, by the way, Im Totty, yeah i know its a funny one, got it at school and it stuck!! Here is my gear list-in order of preference.
JD990 - Undoubtedly THE BEST synth Roland have ever done.
Nova - Ultra Phat - I MEAN IT - it is the nuts!
Jupiter6 - Mean Mutha! As ive heard before, stick that b****** in unison and leave it there! Cross mod is evil like that.
XV5080 - Great synth, still digging into it at mo, it has endless potential.
S3000XL - Great Bread and Butter sampler, rock solid.
Drumstation - Does what it says on the tin.
Boss SE70 - Great for lo-fi grunge fx.
Mackie 1604VLZ - I NEED MORE CHANNELS, but its a good one
Korg X5 - Still love some of its M1 sounds, but its abit old hat now - just a controller really
Pentium 200 96mb, Cubase, rebirth etc etc
I want a G4!
[This message has been edited by Totty (edited 01-01-2001).]
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28712 - 01/01/01 05:43 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 01/27/01
Posts: 217
Loc: Lexington, KY USA
|
Emrys: I feel your pain. As has been observed on the general forum, there just isn't a substitute for a real drummer.
I've been advised by many folks here that using a sampler for drums is second, as you can record, tweek, and sequence the exact sound you want, and aren't dependent on what the manufacturer burned on the ROM. 3rd place goes to the better quality modules, Roland's V-Drums seemingly getting the most favorable reviews overall (I've heard a TD-8 - it's good). Better drum modules can allow tweeking, which might allow you to find a tom sound which sounds good rolled.
All: I wasn't going to list my equipment, but as I'm 1/3 of the way through a home CD project which is going better than expected, here's what I'm using:
Sequences: Noteworthy Composer running on a bailing-wire-and-bubblegum W98 machine (AMD-2 450, 160 meg RAM - my son and I build computers).
Sound equipment: Roland JV-1010 Yamaha PSR-270 (almost unused) MOTU MicroExpress MIDI patch module DBX 266XL Compressor/Limiter/Gate Yamaha REV100 reverb/delay Yamaha DGStomp guitar preamp Guild G41 steel string guitar Palmer Pretend-a-Strat guitar Alesis Studio 12R mixer (pick up tomorrow) Rented for this project: Alesis LX20 8-track ADAT Alesis Studio 24 I'll be burning the final CD on a Tascam CD-RW700 CD Recorder, which is owned by the school at which I'm technology coordinator.
Most of this equipment was really cheap, but has worked flawlessly (with the exception of the Yamaha DGStomp, which quit after 3 days of use). Despite the abuse it's taken on this forum (some from me!), the JV-1010 has really proved to be a pleasure to work with. I have the orchestral expansion card on order, hoping to increase its usefulness. The DBX compresser unit is really great for how cheap it was, and the Yamaha reverb, found used for $125, has been amazing! The MOTU unit is being under-utilized, but as it takes all the hassle out of MIDI routing, it'll come into its own as I add modules in the next few weeks.
Back to work . . .
[This message has been edited by OldSchool (edited 01-01-2001).]
_________________________
"The problem with the world is that the ignorant are cock-sure, whereas the intelligent are full of doubt." - Bertrand Russell
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28713 - 01/01/01 09:04 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Anonymous
Unregistered
|
Originally posted by OldSchool: Emrys: I feel your pain. As has been observed on the general forum, there just isn't a substitute for a real drummer.
I've been advised by many folks here that using a sampler for drums is second, as you can record, tweek, and sequence the exact sound you want, and aren't dependent on what the manufacturer burned on the ROM. 3rd place goes to the better quality modules, Roland's V-Drums seemingly getting the most favorable reviews overall (I've heard a TD-8 - it's good). Better drum modules can allow tweeking, which might allow you to find a tom sound which sounds good rolled.
Well, I've actually had a bit of success with getting the leading edge off the individual hits in my rolls. I've spent about 10 hours working on trying to get some of the messages listed in the M-BD1's manual to work, and finally have gotten pretty close by adjusting a parameter called "TVF&TVA Envelope Attack Time". It works nicely for the roll on the hi tom and on the low tom... seems more like a toggle for the mids, though, which is irking me. I'm going to put a sample of pre- and post-tweaking on my site in a bit, if anyone's interested in hearing it. (That's http://www.speedlimit35.com/mbd1rolls.mp3, in case that link doesn't work.) I've been trying to find a good editor program to use with the M-BD1, without much success... I've tried SounDiver, but I'm shooting in the dark with that, and everything else seems to put the smack down on my W2k box (sudden reboots... wierd). Anyone got any suggestions, or am I gonna have to write my own bloody editor? (Well, I have been looking for a good project to learn java on...) As soon as I scrape the bucks together, I'm definitely planning on going crazy and picking up a full VPro kit... that thing is suhweet! No, I don't really play drums (I think my IQ's too high ![](http://www.synthworld.com/ubbs/wink.gif) ), but I'm pretty sure that with that kit, my sequencer for tweaking, and a set of real cymbals, I'll never have to worry about the sound or realism of my drums again. ------------------ http://www.mp3.com/speedlimit35
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28727 - 01/19/01 02:27 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 06/29/00
Posts: 13
|
Owned a JV-1010 + Bass&Drums card for just 2 weeks and I'm still impressed!
Easy to use (with a PC), and I've already started programming a few patch improvements (surely they're not serious with that tambourine waveform that sounds like a jingle bell Father Christmas dropped?).
I like the pianos on the inbuilt Session card, and the bass & drums on the Bass&Drums card are terrfific!
Just be warned though - the drums on this card only have bass drum, snare, toms, cymbals & high-hat - anything else you'll need to find elsewhere.
I'm a guitarist (real picky about guiitar sound) and have never heard anything that comes remotely close to sounding like a real guitar, and this synth is no different, but some are as good as I've heard anywhere. Doesn't matter - I'll be using real guitars in my recordings.
My sequences have immediately taken a lift from the old Korg X5DR module. Thousands of patches on the web - I've already built up a good library of the basic sounds I need (mostly brass, B3 organs, piano, strings, pads, bass & drums).
Rock on, Hound Dog
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28728 - 01/31/01 08:25 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 10/07/98
Posts: 15
Loc: Mexicali Baja California, Mexi...
|
I,m KUNNY
my roland equipment: a new XV 5080, XP80 loaded with orchestral, session, vintage and vocal board. JV 1080 with pop board, keyboards of the 60's & 70's and world expansion boards. other roland synth and stuffs: D70, D50, Juno 106, SR50, KC 500, sustain pedals and XL roland T-shirt.
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28730 - 02/07/01 10:08 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Anonymous
Unregistered
|
Originally posted by epu: Okay, this board has been pretty dead lately. What I'm interested in knowing is, how many people are here who own Roland JV/XP/XV gear and what they have. Tell us who you are and what you have. This will give us an idea of how many people are here who have Roland JV/XP/XV gear.
This would also help us realize how much potential help we could have (being that we know how many people are at our disposal).
I'll start - I'm [b]epu. I have a Roland XP60 with the Hip-Hop,Bas& Drums,Orchestral and Exp. II cards. I also have an SC880. The Infamous EPU. ![](http://www.synthworld.com/ubbs/biggrin.gif) [/B] I'm "ExP60". Also a Roland XP60, with Bass & Drums, Vintage Synths,Techno, and HipHop cards. I also have a Keyboards of the 60's and 70's not installed. Any hints? (Only 4 expansion slots.) Is there a BB for XP60 and XP80 users only? I'm "ExP60", Roland XP60 with Bass and Drums, Vintage Synths, Techno, and HipHop cards. I also have a keyboards of the 60's and 70's not installed. Any hints?
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28732 - 02/08/01 11:10 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 12/31/69
Posts: 90
|
Oooooh I forgot somebody..... Alfax, I use the XV-88 for Praise and Worship stuff, soft rock kinda stuff, and classical piano. Eventually I'll be using it for midi sequencing, but not right now. It really has a broad scope of sounds so don't let my boring old stuff discourage you..... In my opinion it is the best for the kind of stuff I use it for though. I don't really know if it can compete with Triton for the electronic market (it has NO sequencer or sampler) But it certainly is capable of just about anything..... I got mine for $2150. www.Music123.com and www.BPMmusic.com have low prices right now... just about anyone will match their prices. Try www.musiciansfriend.com Any specific questions??? ------------------ John 3:16 For God so loved the world, that He gave His only Son, that whoever believes in Him should not perish, but have everlasting life.
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28743 - 03/13/01 04:18 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 02/13/01
Posts: 12
Loc: Dessel, Belgium
|
Hi JV/XP/XV-people, I'm Hans from Belgium. I own an XV-88 and an MC-80 sequencer for a month now. I used to have an RD-600 and an E-96 keyboard before. I got rid of them because I needed more sounds and I never really used the music styles in the E-96. With the MC-80 and the XV-88 I can make my own music from the bottom. I thought the keyboard touch/feeling of the RD-600 was very good, but the XV-88's is better. I liked the RD-600's pianos more though. With the XV-sounds I've got everything I need. Although in some sounds (including the XV piano patches) you can hear some irritating noise at certain velocities, but I hope the piano sounds on the new SRX-03 "Studio" Expansion board will be better... Yeah, you heard it right: Roland announced a new member of the SRX-family at Frankfurter Musikmesse, probably the equivalent of the SR-JV80 Series "Session" board. There's also a new RD-700 coming up with two SRX-Series expansion slots. I searched the Internet about all this but I only could find information in Dutch/French on the Roland Benelux website at http://www.roland.be/ff2001.html. Check it out! Best regards, Hans
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28748 - 03/13/01 10:51 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Senior Member
Registered: 02/23/01
Posts: 3849
Loc: Rome - Italy
|
Hello, brothers-in-Roland out there in the world. I live in Rome, Italy, and have just bought an XV 3080 with the Session and the Vintage Synth board; I was undecided between the 3080 and the 5080 and have to thank Chris (a.k.a. Feefer) for his advice. In the past I have had other Roland gear (D50, D550, D70, S750, JV80, R8, R8M). I haven't got any SRX card because neither the Drums nor the Piano board did convince me (I have already all the drum samples I can ever need and own a Yamaha P100 digital piano). So, better wait for future releases.
_________________________
Korg Kronos 61 and PA3X-Pro76, Roland G-70, BK7-m and Integra 7, Casio PX-5S, Fender Stratocaster with Fralin pickups, Fender Stratocaster with Kinman pickups, vintage Gibson SG standard.
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28752 - 04/01/01 02:05 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Anonymous
Unregistered
|
Hey, I can finally respond to this! I just picked up a Roland JV-2080 and Orchestral board, both well worth the price so far, IMHO, even if the instruction booklets aren't the best on the market. The Orchestral II is probably going to be my next pick-up (I'm doing orchestral/film score style music. Go fig.), and use both Finale and Cakewalk software.
I'm still a relative newbie, and am starting to get my feet wet with sysex functions. There but for the grace of God, etc. etc. and so on. Hope to be able to tell you more soon!
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28753 - 04/02/01 12:04 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 10/31/00
Posts: 233
|
I have a Yamaha A4000 Sampler, and good that it is (very good indeed), i need Quick accessable sounds at my disposel, as you have to wait a while to load the samples. I was thinking of Part exchanging my A4000 for a XV 3080, and wondered if it was worth the upgrade! - just how good is this module?, it can't import Samples like the XV5080 I belive, so I will be without anysampling funcions: The sounds I'm after are Orchestral ones (very realistic ones as well, not just good- but very very good!). And I want some excellent Cello, Viola Soloist sounds etc - to go with my KN6000 Arranger keyboard. Has the XV got some good soloist sounds? - I wonder!. Oh...and yes, I posted here to make it up to a "100" replies ![](http://www.synthworld.com/ubbs/smile.gif) Jupiter
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28762 - 07/31/01 03:51 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 11/12/99
Posts: 10
Loc: Bognor Regis SE England
|
Hey Guys!
Been really interesting reading all your posts! I own:
Roland Xp-50 which I've had for 6 years, and following an update of the original operating system (which did WIERD things with Std MIDI files!) I've enjoyed every moment of having it, especialy now that I know it very well! I have the 60's an 70's keys, and Orch I exp boards an love both of em! Roland A90-EX (with VE-RD1) which again I love, the keyboard is perfect for me! Mind you, luggin it around for gigs is a pain! Also I own a yamaha ex-5, which has a fantastic sonic repertoire, but comes with a really horrible operating system. I use all this live, but also for sequencing stuff on my computer when needs must! (Well we all need to pay the bills!)
Enjoying this forum immensly, nice to be able to tap into the knowledge of so many XP/JV users!
Enjoy your music!
toaster
_________________________
Toaster Remember: Amateurs built the ark, Professionals built the Titanic
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28767 - 08/15/01 09:00 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 07/30/01
Posts: 152
Loc: Michigan/US
|
Hi! Well, my question goes out to all those roland xp users (and whatever else may apply). I have a bunch of software programs on my computer, like cakewalk and sound forge and acid pro, but I'm having trouble hooking the xp up to the computer. The problem is that the jacks on the xp are 1/4" and the input on the computer is 1/8". There are a couple of things that I was thinking of doing, and maybe somebody could help me decide. One, I was just going to hook the xp up to my digital 4 track, record the songs onto that, and then hook the four track up to the computer (it has 1/8" outputs) and record them onto one of my audio programs on there. Two, I was looking at these midi converter boxes (you can buy two, four, six, or eight input/outputs) that you hook your midi instrument up to then I guess you hook that up to the computer and it acts as a kind of adapter. (I'm not too sure on that, I think that's what it does) What do you think the best thing to do would be? What would get the best results? And would I lose quality in the sound? One more question, When you record from the xp onto a recorder (such as a computer or dig. 4track)using the midi cables...does it automatically seperate the different parts or midi channels? How does that work? Like if I used this method to record onto cakewalk and I had four tracks recorded on the xp, and I hook up the midi to the computer and press record on the PC, would it automatically record four seperate tracks? As you can see, I'm very confused. Please help!
[This message has been edited by stillme (edited 08-15-2001).]
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28796 - 02/06/02 08:52 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 02/16/01
Posts: 14
Loc: St. Louis, Missouri, USA
|
Originally posted by KenD: I'm Ken with an XP-80 who has bought the Roland training video on how to use it and can't even find time to watch it!
But I will, soon, honestly!
I just hope music-life begins at 40! Sure does, Ken! I got my first synth, an Ensoniq SD1, 5 years ago at age 42, and added a Roland JV1080 a little over a year ago. I've been playing in the praise & worship band at church for 3 years now and am having a blast. Never too old to rock and roll!
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28807 - 04/05/02 06:03 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 03/28/02
Posts: 16
|
I had a JV-90+techno card, now I have XP-80 + same techno card ![](http://www.synthzone.com/ubbs/smile.gif) The JV-90 was my first synthesizer and I loved it. Great sounds, lots of editing possibilities and a large keyboard. I also had the Voice expansion board which was basicly a second JV with another 28 voices. You couldn't play the keyboard with 56 voices simultaniously tho (28+28 seperate)... and the voice expansion could only play patches made with internal waveforms. I found that the JV-90 was a bit unstable for midi-sequencing. Really, I sometimes could hear the difference between MUTING a part and DISABLING one... meaning that the other parts would sound more stable with the part being disabled (no, they didn't exceed the voice-limit). Now I have the XP-80! Much more stable, more voices, waveforms, effects and a large lcd screen but it sounds very much the same. Edit: It's hard to tell but maybe the JV-90 sounded a bit warmer btw I use the ChangeIt patch editor, it's great!!! http://aragon.iitb.fhg.de/moss/Software/ChangeIt.html [This message has been edited by Bahamut (edited 04-05-2002).]
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28824 - 08/14/02 04:10 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 08/14/02
Posts: 8
Loc: Alexandria, Greece
|
Hi Sergiu, the SFX card is a dream of it's own! If you want to make ambient, atmospheric or expiermental/film music, this is the card to by. No chromatics, just abstract and FX sounds. Completely useless card for orchestral, contemporary music. One tip: turn Local control to OFF, to avoid "phasing" of your sounds.
_________________________
Unicorn
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28826 - 08/19/02 02:04 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Member
Registered: 01/30/01
Posts: 344
Loc: NJ, USA
|
1) JV-1010 2) waiting for my used xp-50 to arrive from e-bay. 3) Fatar SL880 4) Casio WK-1800 5) Voyettra's Digital Orchestrator Plus on IBM laptop 6) Midiman Midisport 2 x 2 7) Taylor 310 acoustic guitar ![](http://www.synthzone.com/ubbs/smile.gif) 8) Ibanez AW100CE acoustic guitar I love the Taylor and the 1010! They make beautiful music together! (well I do i mean, simple stuff but very nice sounds) Bob
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28827 - 08/29/02 02:20 PM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 08/29/02
Posts: 9
|
Jeff from Boston, here.
I've got an XP-30 and recently got a fantastic deal on a demo XV-3080 that came with the SRX Dynamic Drums card and the Country, Techno, Special FX and Experience 1. Already sold the Special FX, Experience 1, and Country Card (I already have another one with my XP), and am trying to sell the Techno card.
Moved my Country and World cards into the XV-3080. Running Cakewalk Home Studio 9.0.
Most of my music is jazz/blues/country based. I love the Country card! It has excellent banjos, dulcimers and mandolins, a whole bunch of acoustic guitars (ranging from great to middling), and a mess of fiddles, washboards, and other country stuff.
In the past I've owned the Vocal Card (complete waste of money), Experience 1 (total waste), and Special FX (can't think of one good application for it).
Thinking of selling my XP and replacing with a dedicated controller because it's too expensive to own both--the reason I'm holding off is because I love the XP's arpegiattor.
Jeff
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#28829 - 09/16/02 10:30 AM
Re: Roll Call - JV80/90/1000, JV 1010/1080/2080, XP30/50/60/80, XV88/3080/5080.
|
Junior Member
Registered: 09/16/02
Posts: 3
Loc: houston, tx usa
|
Hey guys,
I'm new here, but I thought I'd post in this forum. I had been using a Roland MV30 sequencer midi'ed to a home keyboard and using a roland r-70 drum machine for percussion, but I just upgraded a bit (or so, I thought). I just purchased a roland xp50 from ebay about a month or so ago. I've still got the r70 for drums, but I purchased a tascam tmd 1000 as well for mixing purposes. Man the xp50 is taking a lil patience to get into, but I'm sure once I get into it more, it'll be great.
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
|
|