Hi
is any way to fix the noise in one of the notes while i am mapping the WAV sample in my triton,there is edit and loop in menu page
,even i tired with master effectes and puting down the bass in my mixer still i can hear the noise here ,then i tried tho stertch on lower note to the noise key to cover the key but still doesn't work.sample speed will affect the noise or any tempo relation ??any clue will be greatfull
Thanx

If you are going through a mixer, then into the sampler, turn the mixer channel down and adjust the input sample level as high as you can without peaking. Mixers produce noise. Also, if you have an EQ on the mixer, turn it off. This creates a longer circuit path to output and creates more noise. Hope this helps.

M33

Hi,

Noise is often less louder then the actual sound.
If this is the case you can take the sound
through a compressor and select an option called 'hard noise gate'.
If your compressor doesn't has this option
you can set it manually:
Attack:1ms
Release:450ms
Threshold: approx: -30db
ratio: 1:1
If the noise stays then try to raise the threshold little by little.
Good luck