Originally posted by miden:
So the Groove is different then...cool, I did not know that.
That is a backward step in my view. The access to the hard drive on the MS is good.
Dennis
[This message has been edited by miden (edited 06-14-2010).]
Dennis,
I am an engineer; I have taken the top of my Audya a number of times and when you lift the top off you scratch the back of the KB where the two edges meet, if you do it on your own there is no other way of avoiding this. I have seen the blocks of wood under the MS, I just thought for a couple of bucks some hinges would stop this and if you allow the top to fall away from the bottom and the cable rip out of the sockets your dead in the water. Getting at the HD in the Audya is a pain and someone who is not good with their hand brain co-ordination could end up with a pile of scrap. I don't think it's going to happen, but the MS and the Groove are like a PC, I need to take the case off mine every now and then and blow out the dust on the fan blades to get the efficiency back up to new, the MS and the Groove will do the same. Just a thought Dennis, looks like the Audya is still mine, going to have 3 KB now, do they do a triple KB stand, hell I'm like Diki 5ft 4" how I will I reach the top one, and Dennis which will be the TOP ONE PA2X,Audya or the X7. In latest, cutting edge technology order. Answer on a postcard please.
Dennis how do you get to the HD on the MS? I have done a Powerpoint for the Audya, can you do one for the MS it would be helpful.
Tony