AJ ASKED ME TO COPY THIS INFO HERE.

Guillermo.
-------------------------------------------

Turn keyboard over so keys are facing down but towards
you.
Remove 4 big screews to the left and right that hold
bottom to back plastic side handles.
Remove all the little screews that hold bottom to back
piece ~ also in the middle you will need to remove the
same size screws that hold the middle to the bottom.
Carefull flip keyboard over so keys are up (as though
you want to play).
Remove top cover (from front to back and flip over.
You should now be staring at mother board (center) to
which the top display board is connected.
Remove screws that hold the top display board to the
top panel DO NOT REMOVE 4 screws around the screen
yet!!. Careful to remove Volume slider as this will
eventually come out.
Remove top circuit board. Sceen should now be facing
you.
Remove 4 screws that hold sceen in place.
Gradually lift screen from right side to about 15-25
degrees so that when you let go, screen is at an angle
of about 15 degrees.
Remove screen. Reinsert screen. YOU WILL NOW HAVE TO
APPLY SOME PREASURE before screwing screen back on.
Reverse process ... until you close up the keyboard
... and you're done.