Hi every one,

On kn7000, I observed that the modulation wheel functions differently on different sounds. I had a sound (don’t remember exactly which one) that the modulation wheel changed the sound's volume.

Is there any where in the kn7000 menu that I can assign different functions to the modulation wheel?

Thanks,
Doron

in sound edit, controller, choice of 13 functions can be assigned, two independent functions can be assigned each individually programmable in maximum depth, with the choice of which sample to effect.

Got it and experimented it, thanks very much.

I observed that the volume of the part1 sound only could be changed with the modulation whee. The part2 sound, its volume doesn't change.

Does Modulation Wheel work only on the part1 sound?

Under TONE ENABLE RAW, what do the 1st, 2nd 3rd, and 4th represent?

GLIDE: Enable/Disable, Is it associated with the pitch band wheel? What does it do?

Thanks,
Doron

save the setting in a sound memory, then use the memory in R1, save another sound with another setting in another sound memory, then use that sound in R2 - same or different effects in both sounds at the same time via the wheel.

each sound is made up of 4 samples, so you could make one sound in R1 of piano and strings for instance, and have only the strings affected by volume when moving the wheel, and have the piano not affected, or affected with a different function via a filter so as the strings got louder the piano got brighter.

glide shifts a semitone via a footswitch.

it's all programmable and in the manual.

Got it. I am going to further explore it. Thanks much!