Could someone tell me the steps used to change a "2nd voice" to a different voice from the one Ketron has assigned?

Thanks
Gary

Hi Gary

Page 16 of the manual: Program/edit/and the User 2 to open 2nd voice page.

Hope this gets you started.
Bernie

Hi Bernie, thanks for the come-back. Here is what I had in mind but apparently it's not possible. If you look at the basic list of voices (right hand) under guitar you will see "folk". The factory has programed "strings" as the default 2nd voice (as they have for lots and lots of other instruments. I simply want to change the 2nd voice for "folk" guitar to something else. Apparently the 1st step is to punch program button but by doing that you no longer find a "folk" guitar anywhere in order to change it's 2nd voice. I cannot imagine how you guys deal with the AJsonic addition to these Audyas which are already so difficult to learn. I'll keep punching buttons but sure would like to know how come the basic list of instruments disappear and a whole new batch show up when the program button is used.

Hi Gary,

go to the "guitar" page.

"Folk" is on button "F4" now.

So press AND HOLD the "F4" button for a few seconds until the display changes.

NMow press button "2/7" and you see the selected 2nd voice.

Press "F1" and change it by choosing a voice as usual ( e.g. "Accordion" and then use the jog dial to select "Master" )

After you´re done press the "save" button and give you "new creation" a new name.

Thanks Snoopy, it seems anything you change regarding the basic voice becomes a "program". I hadn't grasped that concept until just now. To many years with my ms40

Thanks to you & Bernie

Right you are