I am using a P-120 as the master, and my KN5000 as the slave. I change my P-120 to midi channel 3, make all the appropriate setting on my KN5000...it all works fine, 'cept when I turn off KN5000. The settings I made were not saved. Is there anyway I can save them? Do I have to save them...? Thought it would not have to be reset every time I turn on 5000. I would hope I would not have to save the settings to a panel memory. Answer my call of distress...if you can!!

MikeFeligno

The KN7000 allows you to save the MIDI set-up to a disc file, on Page 2 of the Save dialog - I can't remember if the KN5000 has the same option - worth a try

------------------
Willum

Hi Mike

Try:

Control / Panel memory mode / Expand / Page 3
Set midi to on

Midi / page 2 / Midi settings load option /
and set the load option as you want it if
it not works with the first step.

Hope this is for any help.
GJ

(However, a full initial will reset all settings to default as far as I have
experienced)