SYNTH ZONE
Visit The Bar For Casual Discussion
Topic Options
#450965 - 04/23/18 06:42 PM Changing keys
hbinfo2001 Offline
Member

Registered: 08/23/04
Posts: 649
Loc: Quebec Canada
Hi Can I have your help for how to change all the white keys
on my kn2600
How to unlid the Under screws covers
My friend from Pennsylvania have bought a kn2600 from Waterloo,Ontario and when he receive it the sdcard was not
working
So he have to purchase another one and with the help of Mel
he purchase one From Florida and he is very satisfed with
He will send me the white keys notes from the default kn2600
that he purchase from Waterloo
And thats why I am asking you your help Because my white keys
are all yellow
Thanks in advance
Howard
_________________________
ketron sd9,Technics KN7000,monitors Adam tv8, Yamaha Mixer

Top
#450980 - 04/23/18 11:38 PM Re: Changing keys [Re: hbinfo2001]
Gunnar Jonny Offline
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
Hi Howard.

The years passing on make many types of 'white plastic' become a kind of yellow,
and if the sun (also tobacco smoke) has reached the keyboard, the color will change faster.
Does everything works as it should, and the color is just a cosmetic issue?
If so, I think the saying 'If it ain't broke, don't fix it' is a very good advise.

And thinking about it, white looks like plastic, a bit yellow'ish make it look like ivory. wink smile
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#450986 - 04/24/18 02:21 AM Re: Changing keys [Re: hbinfo2001]
RMepstead Offline
Senior Member

Registered: 06/15/02
Posts: 1664
Loc: Wootton Bassett - Wiltshire - ...
I agree with GJ. Taking your keyboard apart and exchanging all the white keys could go terribly wrong. How about trying to clean your existing keys?
_________________________
Roger M

Top
#451009 - 04/24/18 03:35 PM Re: Changing keys [Re: RMepstead]
jd5live Offline
Member

Registered: 05/16/06
Posts: 343
Loc: Bilston , West Midlands,Englan...
Roger, I have commented on our site, the keys are in sets of an octave 2 white mouldings and 1 black. they do not respond to cleaning as the type of plastic includes the hinge/pivot point and has to be flexible so this does mean the plastic is softer than the type used in the KN7000 and also much more prone to yellowing over time. My son's KN1500 had some broken keys so I had a chance to experiment with different ways of whitening without any form of success, the yellowing seems to go right through the key rather than just the first few thousands of an inch which could be cut away with cutting pastes.
Regards John.

Top
#451016 - 04/24/18 05:19 PM Re: Changing keys [Re: jd5live]
hbinfo2001 Offline
Member

Registered: 08/23/04
Posts: 649
Loc: Quebec Canada
Hi, I thank you for your responses
the keys are very yellow,ich (always in the sun)no smoker and there is a white key that was broken and
glue by the guy who sold me the kn2600
But my friend in Pennsylvania have purchase a kn2600 from Waterloo ONT. and the
sdcard was not working
So he bought another one in Florida that was perfect
My friend ,he is a technician ,and he will send me the keys
from the first kn2600 that the sdcard was not working
But the keys are white and not yellow ,ich
Thats why I am asking you my friends How can I open my kn2600 so I can change the keys by patch.
My KN2600 is on top my Audya5 So the comparation of the white
keys yellow and white I have a hard time to accept the comparation.Althought my kn2600 is working very good
I am suppose to receive the keys next week
Thanks again
Howard
_________________________
ketron sd9,Technics KN7000,monitors Adam tv8, Yamaha Mixer

Top
#451024 - 04/25/18 01:46 AM Re: Changing keys [Re: hbinfo2001]
Gunnar Jonny Offline
Senior Member

Registered: 04/01/01
Posts: 4381
Loc: Norway
Maybe a service manual would do good, or maybe your friend that took the keys from the other KN could guide you how to replace?

The servicemanual would be good to have, but unfornately I dont have any.
Another long shot could be to ask Walt Tenay if he still have the servicemanual avalable?

http://www.synthzone.com/forum/ubbthreads.php/topics/395521/Service_Manual_for_SXKN2400_an

But, it's quite a long time since this post was published, and I have not seen any post by Walt for a very long time.

Last post was September 2015 as far as I have found out by a search:

http://www.synthzone.com/forum/ubbthreads.php/topics/408097/
_________________________
Cheers 🥂
GJ
_______________________________________________
"Success is not counted by how high you have climbed
but by how many you brought with you." (Wil Rose)

Top
#451054 - 04/25/18 02:34 PM Re: Changing keys [Re: Gunnar Jonny]
hbinfo2001 Offline
Member

Registered: 08/23/04
Posts: 649
Loc: Quebec Canada
Thanks John I will try to get the service manual
Howard
_________________________
ketron sd9,Technics KN7000,monitors Adam tv8, Yamaha Mixer

Top
#451064 - 04/25/18 04:47 PM Re: Changing keys [Re: hbinfo2001]
jd5live Offline
Member

Registered: 05/16/06
Posts: 343
Loc: Bilston , West Midlands,Englan...
Hi When you dismantle you keyboard the Keyframe is part of the top case if you can try not to disturb the connections as the type of connections that Technics have used are great if they are not disturbed too much, any tarnish that has formed can cause the processor to read as a fault and will stop the unit from working. If I remember you should be able to remove the contact boards without disconnection and then gently fold them out of the way, letting you gently unmount the key sets and feed them out of the top case.
wishing you luck regards John.


Edited by jd5live (04/25/18 04:49 PM)

Top
#451125 - 04/26/18 09:54 AM Re: Changing keys [Re: jd5live]
hbinfo2001 Offline
Member

Registered: 08/23/04
Posts: 649
Loc: Quebec Canada
Hi John Thanks for your avise very appreciated
If I decide to do the job I will give a feeback
Thanks again
Howard
_________________________
ketron sd9,Technics KN7000,monitors Adam tv8, Yamaha Mixer

Top
#451698 - 05/08/18 06:47 PM Re: Changing keys [Re: hbinfo2001]
hbinfo2001 Offline
Member

Registered: 08/23/04
Posts: 649
Loc: Quebec Canada
Hi, Everything ison control
Today I change all the keys of my kn2600 and it whent
very good
Now the keys are whiter ,before it was very yellow ich when I purchase the kn2600 But the rest was in a great condition
the keyboard was expose to the sun in is living room
Thanks again for tour help
Howard
_________________________
ketron sd9,Technics KN7000,monitors Adam tv8, Yamaha Mixer

Top

Moderator:  Admin 



Help keep Synth Zone Online