We are starting a series of "how-to" type videos as we are learning more about our SD40. Today we released the first one where we go over the HS-9 which is a programmable bank with nine buttons, so you don't need to scroll to the correct screen directly on the SD40. The "button" assignment list is quite extensive allowing more than the "start/stop/break/fill switches you might expect to be programmed.

Check it out -- Ketron SD40 / HS9 Hand Switch. Just like the Sound Demo Series we recently started, we will be adding to our "How To" video series over time.

We have some ideas of things we plan to cover but would welcome your input for topics you would like to see covered.

Thanks for the video. It's good to know about the HS9, but I wish the SD40 would allow standard MIDI messages to call up functions like Korg arrangers and others. Instead, the SD40 uses SysEx messages, and it is hard to find MIDI controllers that would send SysEx messages.

We couldn't agree more on the sysex messages. That was one of the topics on our list to go over as we think some folks may not be aware of them and what can be done but as you mention - You really need to be using a DAW to take advantage of them.

In any event - Stay tuned for that coming up in the near future.

How would you trigger a certain string of SysEx messages from a DAW?

Looks same as older Solton handswitch used for MS series modules, no?

You could be right. I was most likely playing Roland in the Solton era so can't say for sure.

Depending on the DAW you are running you should be able to insert a "sysx event" at whatever timestamp you want one of the supported buttons pushed. That's not going to work too well for a sustain pedal but should you want to switch from Arranger "A" to Arranger "B" or hit Fill / Break, etc. type buttons it can be done.

We do plan to shoot a video on that topic in the near future as it might be of interest to some folks? As part of that, we will share the sysex info that we are aware of.

We lost a power supply in our primary machine over the weekend so we are limping along on a backup machine and don't have access to all of our "stuff" for a few days - Hoping to get that sorted out and 100% back online before the end of the week.

Before you post a video on SysEx, maybe you could start a thread on it?

I sent SysEx to my SD40 from Bome SendSX or MIDI Ox in my PC. The manual lists a number of SysEx messages; I was able to get some to work, but I couldn't get the others to work.

I don't think I want to involve a PC to send SysEx to the SD40.
I have a Peavey PC1600x that can send SysEx messages, but that's a little bulky, and also I want to use a foot controller.
http://www.defectiverecords.com/pc1600/pc1600.html

I think the Bomebox(https://www.bome.com/products/bomebox#) can be programmed to send SysEx messages, and you can trigger a certain string of SysEx from any MIDI foot controller.

I might add that the Bomebox is very powerful and flexible. Essentially, it is a "MIDI computer" without the need to be connected to a PC.

Hey Torch - Be happy to start a new thread when we get started with some SysEx examples. Interesting request of doing that without a computer. Never needed to do that and I'd have to look and see what SysEx functions I could send via our primary controller.

To get things started, we plan to show a few examples from a DAW and let's see where the thread goes as folks comment. I'd be interested in learning more about what you suggest. In the meantime, we are working on a short "How to" video this weekend to show using Cakewalk Instrument Maps with an SD1000. Let me put a reminder on my calendar to bump up the priority of putting together something on using SysEx.

love these things..

My kronos (and pa4x but using it on the kronos) supports the Korg Nanopad 2, which would also be a great thing for the SD9 with the launchpads...