Hi,I need your help for the settings I purchase a sound module
ketron sd1000 for my kn7000 that I want to keep
I will had love to purchase from AJ but I have purchase from the Neitherlands because it came with a pacth (floppy disk)for
my kn7000
sd1000 have 512 sounds and I dont use my laptop
So with the patch I have only 128 sounds when I press favorites and sound explorer ,the sounds are on right 2 on my kn7000,for the rest of the
sounds I have to make the settings one sound at a time with
the midi channel 2,program change and mbs and press send
After I cannot see the sound that I have set
Is there another settings I can do
I want to keep my kn7000
Sorry AJ if I did not purchase from you
Thanks in advance
Howard

It all sounds a bit complicated to me. Is it possible to just connect the sound output of the ketron to the sound input of the KN7000 and use the two keyboards one above the other?

Oops I've just found out what a Ketron SD 1000 is - ignore my comments above please.

Hi Roger,its ok I know its complicated
But I thing there are members on this forum who have a sd2
or sd1000
Happy New Year for all the members
Howard

Try posting on the Ketron Forum on Synthzone....
http://www.synthzone.com/forum/ubbthreads.php/forums/22/1/Ketron_Forum

Thanks Bill, appreciated

Hi Howard,

Operating the SD 2/SD 1000 sound module in conjunction with the key depends on the requirements you want to use.
First the integration of the sounds into the key.
One of the possibilities is to use the internal sounds of the key and the additional sounds of the SD 2/ SD 1000. The internal sounds are reproduced on Right 1 and the sounds of SD 2/ SD 1000 on Right 2.

Settings must be made so that this is the case and can also be saved.

1. In Midi - Part Setting you set Right 2 to Channel 2, the others to "OFF"
2. So that the internal sound of the key does not resonate, "LOCAL" is set to "OFF".
3. In Midi - Input / Output Setting, "Transpose" must be set to "ON" so that transpose changes are also accepted.
4. Under Midi - Common Setting, "Program Change to Panel Memory" must be set to "ON" so that the different sounds of the SD 2 can later be called up via Panel Memory.

In order not to make these settings again and again, you create a "User Setting" on page 4/4 with Midi - Midi Presets and save this UserSetting like a song. If you play without the SD 2/SD 1000, everything stays the same. If you play with SD 2, you call up the corresponding user setting on page 3/4 and have the saved settings ready.

To have a sense of achievement, here is an option:

After the connection, as shown in the picture, press the "Program Menus" button between SD 2/SD 1000 and KN 6000/7000. Press "Midi" in the bottom left of the display.

The Midi Menu appears in the display. Press "Input / Output Setting" at the bottom left and make the settings as shown in the picture.



Exit with "Exit" and press "Common Setting" and make the settings as shown in the picture.

Common Setting.jpg (29.83 KiB) viewed 30 times


Exit with Exit. Press "Part Setting" and make the settings as shown in the picture.



Exit with Exit. Press "Panel Memory Output" in the display and make the settings for Panel Memory A 1 as shown in the picture. Load program 68 (page 37 of the operating instructions SD 2) is the Rock Tenor Sax with MSB 0). Save with PM 1.



Exit with Exit. Press "Program Change Midi Out" and make the settings as shown in the picture. Then press the "Send" button.




Exit with Exit. Press "Panel Memory Output" in the display and make the settings for Panel Memory A 2 as shown in the picture. Program 57 (page 38 of the operating instructions SD 2) is the Golden Trp. With MSB 1). Save with PM 2.



Exit with Exit. Press "Program Change Midi Out" and make the settings as shown in the picture. Then press the "Send" button.



Now the rock tenor sax of SD 2 must sound on PM 1 and Right 2. If you press Right 1, the internal sound of the KN 6000/7000 will sound.

If you press PM 2, Right 2 will sound the Golden Trp. Des SD 2.

If this setting is saved on the hard disk or the SD card, the set sounds are called up when loading.

Hallo Harry,Thanks a lot for all the works you have done and
I appreciated very much I know you have done a big job for
all the settings for sd1000 to kn7000 with patient
now I have to learn all the procedure and do the settings
the sd1000 its only for the sounds for the kn7000 and not using
with my laptop
Has soon the settings is done I will return to you
Thanks again Harry
bye
Howard