![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/top_right_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/left_span.gif) |
#50794 - 11/21/05 04:32 PM
Re: changing volumes in preset rythmns
|
Senior Member
Registered: 03/19/02
Posts: 1098
Loc: Cambridge, Cambs, England
|
Hello Jess,
I'll assume you would like to create your own setups with varying styles, sounds and tempos using the 'normal' styles offered on the KN - WITHOUT THE MUSIC STYLE ARRANGER ON. Here's how I would do it:-
With VARIATION 1 in lefthand on, I would make my choice with rhythm tempo set at 100 say. Press and hold BLUE SET button at the same time Press PANEL MEMORY 1.
Go to Variation 2, make your choice, change tempo say to 120, press and hold BLUE SET button together with PANEL MEMORY 2. Repeat actions with Variation 3 to PM3 and Variation 4 to PM4.
Go back to PANEL MEMORY 1, Press BANK VIEW, go to Page 3, name both Bank and Panel Memories 1-4. OK and Exit EACH time. You should now be on your Home Page where you will see your 4 named PMs in Bank A.
Press PROGRAM MENUS (under red record button). Press COMPOSER and then CUSTOM STYLE COPY. You will see FROM Memory Bank A TO Custom Style 1, click on OK. and EXIT. To check you're on the right road. Press MUSIC STYLIST then CUSTOM STYLIST and your four named settings should be in the No.1 slot. EXIT through to Home Page.
Repeat all this if you wish to fill all 20 slots in the Custom Stylist but do remember to CHANGE THE NUMBER OF THE CUSTOMER STYLE AT THE COPY STAGE, it'll be easier for you when you're using them for playing.
If you wanted to use all 8 of the PMs you will have to put PMs 5-8 in slot No.2 of the Custom Stylist. The Custom Stylist uses Flash Memory which means you can play all 20 slots without loading any of them and your settings will NOT CHANGE until you decide to change them.
If you then save these to floppy or SD Card, you can use this sytem again and again, building up a whole load of your own settings which of course, when saved to SD Card is a 'doddle' to load.
My tip for you is to save all 20 to a floppy disk then save to SD Card using the COPY DISK FEATURE of the card. This loads all 20 in one go.
I Hope this helps, but if I have misunder-stood your need or you would like to know something else that I can you help with, feel free to ask.
Good luck!
Aud (U.K.)
|
Top
|
|
|
|
|
![](http://www.synthzone.com/forum/styles/images/black_and_gold/right_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_left_2.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_span.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_1.gif) |
![](http://www.synthzone.com/forum/styles/images/black_and_gold/bottom_right_2.gif) |
|
|