Hi Alec,
thank you so much. Cheered me up after a really bleak week.
my KN's BACK working normally. The factory reset appears to have fixed the Demo's & the faulty steptime sequencer record.
It passed the tests d3 to g3
Test a3 (message _ "should be Ok"
Test b3 Test floppy , the numbers got to over 2000 and still running, but they all show as being " OK" is there a cut off point where the numbers stop or does it just keep running?
I wasn't aware of any floppy drive problems after the lightning strike.
best wishes
Rikki
Originally posted by technicsplayer:
sorry to hear about your accident.
try a factory reset, hold down 8&16, Rock, Ballad and Jazz buttons and switch on. Do this first.
there are some others tests to try:
take out any EW boards.
1 hold down keys D3 and D4, switch on, anything in screen? then switch off.
Wait a few seconds.
2 repeat with keys E3 and E4 - press auto sweep.
3 repeat with F3 and F4 - press demo then panel set for left/right led check.
4 repeat with G3 and G4 - lcd test
5 repeat with A3 and A4 - ok confirmation
6 repeat with B3 and B4 - press test with blank floppy in drive.
if this does not work get in touch and I'll send you some special self extractors to try re-installing the o/s.
at least then you'll know if it is the hardware.
No responsibility is accepted for anyone else who chooses to play around with the above.
good luck!