Hi Folks , can anyone help with the schematic wiring diagram of the Technics 4 switch foot controller ,


Regards .....Giovanni

There is a schematic at my old web site for the KN5000. See http://home.no.net/jimgg/bobs/Hruby.htm

Hi Bob , i really appreciate your help .
But I'm looking for the schematic of the Technics/technote foot controller .

regards ...giovanni

Hi Giovanni, The pin-outs for the two foot switch models are the same. They both plug into the same connector. The data in the article is for the Technics SZ-FC2 Foot Controller. Did you see the connector pinouts about half way through the article? The four individual foot switches themselves are simply normally closed switches. Maybe I'm missing your question?

Hi Bob , Thanks for you help you are very kind .

I've past the details on to the man who is making me up a special lead for the 4 switch foot controller .

once again a big thank you for your help .

Regards ...Giovanni

Some years back there was a person that made the equivalent of the four pedal switch except it was comprised of four small button switches that mounted just outside of the keyboard on the left side so that all could be controlled easily with the left hand instead of the foot. The article contained complete directions for constructing such a device, including a schematic.
So far I have not been able to locate the article - maybe someone else can jump in here. If I do find it, I'll pass it on.
Walt

Walt, that's what is in the article that I gave a link to, above. It shows how to connect four push button switches to the connector for the foot controller. In the description, it gives the wiring diagram for the foot controller.

Thanks, Bob
That's the one.
With computor changes and hard drive crashes, I lost track of a lot of things. I'll print this out for future reference before I lose it again.
Walt