SYNTH ZONE
Visit The Bar For Casual Discussion
Page 1 of 3 1 2 3 >
Topic Options
#96806 - 08/25/04 09:59 PM When would one use a mic pre-amp?
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2207
Loc: Dayton, OH USA
Just wondering...

Bill in Dayton
_________________________
Bill in Dayton

Top
#96807 - 08/26/04 01:34 AM Re: When would one use a mic pre-amp?
MacAllcock Offline
Senior Member

Registered: 03/02/02
Posts: 1221
Loc: Preston, Lancashire, England
If you aint got a mixer and you are getting hiss from the mic channel because you have to turn everything up?
_________________________
John Allcock

Top
#96808 - 08/26/04 05:32 AM Re: When would one use a mic pre-amp?
Uncle Dave Offline
Senior Member

Registered: 12/01/99
Posts: 12800
Loc: Penn Yan, NY
If you rhave a psr you'll get hiss no matter what you do. The mic input is not very clean.

Preamps work wonders for digital recordings, and can add some "oomph" to a somewhat average mic. Studio applications mostly, but certain live situations can benifit as well.
_________________________
No longer monitoring this forum. Please visit www.daveboydmusic.com for contact info

Top
#96809 - 08/26/04 05:55 AM Re: When would one use a mic pre-amp?
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2207
Loc: Dayton, OH USA
Uncle Dave-

So, for the most part, if I'm clearly pleased with my live sound as is...it wouldn't be a significant improvement to look at adding a mic pre-amp, true?

The subject came up in my openign discussions with the sales tech when I was looking for new pa speakers...The tech felt with a mic pre-amp, it might enhance the vocals to where my old yamahas might have been acceptable. Regardless, it wouldn't have addressed any of the instrument sound reproduction...

Bill
_________________________
Bill in Dayton

Top
#96810 - 08/26/04 06:22 AM Re: When would one use a mic pre-amp?
travlin'easy Offline
Senior Member

Registered: 12/08/02
Posts: 15576
Loc: Forest Hill, MD USA
Bill,

Are you singing through the keyboard? If so be sure the switch on the back is set to mic--not LINE.

Dave, I don't get any hiss at all with the 3K using the Crown 311 or Sennheiser, but this may have something to do with the way I have the mic EQ set.

Gary
_________________________
PSR-S950, TC Helicon Harmony-M, Digitech VR, Samson Q7, Sennheiser E855, Custom Console, and lots of other silly stuff!

K+E=W (Knowledge Plus Experience = Wisdom.)

Top
#96811 - 08/26/04 06:26 AM Re: When would one use a mic pre-amp?
Bill in Dayton Offline
Senior Member

Registered: 08/23/04
Posts: 2207
Loc: Dayton, OH USA
Gary-

No, not using Tyros for any vocals at this point...

I'm running my Sure 57a into my digitech VR, then taking its stereo outs into a stereo channel on my mixer...

I'm not hearing any hiss or noises at all...

I guess I had never used a mic preamp, and wasn't sure if it was anything I ought to be looking at, that's all...

Bill
_________________________
Bill in Dayton

Top
#96812 - 08/26/04 06:47 AM Re: When would one use a mic pre-amp?
cassp Offline
Senior Member

Registered: 03/21/03
Posts: 3748
Loc: Motown
Bill, I haven't used a preamp either, but I think even the VR would qualify as a preamp to some degree. My understanding is that a preamp can help boost/lower some of the characteristics of a mic to give a beteer or different sound. In a live situation I don't feel a preamp is usually necessary, at least not in our situations.
_________________________
Riding on the Avenue of Time
cassp50@gmail.com

Top
#96813 - 08/26/04 07:11 AM Re: When would one use a mic pre-amp?
Dnj Offline
Senior Member

Registered: 09/21/00
Posts: 43703

Top
#96814 - 08/26/04 07:54 AM Re: When would one use a mic pre-amp?
DonM Offline
Senior Member

Registered: 06/25/99
Posts: 16735
Loc: Benton, LA, USA
No mic hiss for me with any of the PSRs.
Sometimes I run the mic straight into the keyboard, sometimes I use a mixer and a "send" to the keyboard. No hiss.
All the demos on my website were made live with the mic through the keyboards. No hiss.
DonM www.donmasonmusic.com
_________________________
DonM

Top
#96815 - 08/26/04 08:34 AM Re: When would one use a mic pre-amp?
Uncle Dave Offline
Senior Member

Registered: 12/01/99
Posts: 12800
Loc: Penn Yan, NY
Trust me, they hiss. If the EQ is set to anything higher than flat ..... you get hiss. Granted, it's not horrible, but maybe your situations and/or hearing loss mask it to a degree.
If you use the Noice gate - it becomes very clear just how much hiss the unit generates. It's not the mic input alone ... it's the general amp.

The Tyros may not have the same noise ratio. I'm just talking psr here.
_________________________
No longer monitoring this forum. Please visit www.daveboydmusic.com for contact info

Top
Page 1 of 3 1 2 3 >

Moderator:  Admin, Diki, Kerry 



Help keep Synth Zone Online