|
|
|
|
|
|
#99843 - 03/16/05 05:53 PM
Re: Intermediate acoustic quality vst's or soundfonts sellers?
|
Senior Member
Registered: 11/10/00
Posts: 2195
Loc: Catskill Mountains, NY
|
Smart Flute from Musiclab might be something to look at as well. If it is anywhere near the quality of their multisampled "Real Guitar", my guess is that it will surely at least match if not exceed any hardware based sounds you can find.
For my ears, B4 does some of the best organ sounds on the planet, that don't actually come from a real B3 or C3. There are some decent alternatives though. ZR3 is a freeware that does some pretty cool organ w/ leslie simulations. Linplug "daOrgan" does a good job too, at less than half the cost of B4.
Then there is the NI Express kb package. If you dont need to tweak, you can probably get it for less than B4. It's a scaled down version of B4, Pro53 ( Prophet 5 emulator ) and FM7 ( DX7 emulator ) all in one package. A friend of mine has this and it's very good. Scaled down means far less parameters that can be tweaked, and less preset voices, but not at a reduction in quality of staple sounds for each instrument. I know because I have both B4 and Pro53, but if I didn't, I oould be happy with Xpress.
BTW, when I play "neutral" styles in OMB ( those not made specifically for Korg ), I find that the free soundfont sgm128 sounds better than my PA80 in almost all cases.
I did an A/B comparison using SD1 and KN7000 styles ( converted to Yamaha .sty with both the PA80 and Live synth pro with sgm128 as my sound modules for OMB through the same soundsystem. Of course I added some chorus and reverb effect to the sgm128 soundfont in order to make it a fair comparison.
Frank makes an excellent point. I think in many cases people listen to soundfonts "dry", and then think that they can't compare to hardware modules. Try this.. Turn off all of the effects in your favoriite hardware arranger or synth / module. Now how does it sound when you play a style ? Not so good is my guess.
AJ
[This message has been edited by Bluezplayer (edited 03-16-2005).]
_________________________
AJ
|
Top
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#99847 - 03/17/05 02:53 PM
Re: Intermediate acoustic quality vst's or soundfonts sellers?
|
Senior Member
Registered: 11/10/00
Posts: 2195
Loc: Catskill Mountains, NY
|
Sgm128 is different from 180. In spite of the lower number, sgm128 has more sample rom and I think it sounds noticeably better. Here is a link for it. It's a large file btw, on the order of 126 mb http://www.sf2midi.com/index.php?page=sdet&id=5038 You might want to also look at Xlutop Chainer as a standalone host. One session can host a combination of up to 10 vst instruments and effects, and it couldn't be simpler to use. You can use Chainer alone, with no other Daw or host needed ( Cubase, Sonar etc ), or you can open it up in your favorite host as a vst. I completely agree with`Frank about high quality effects. The built in ones for soundfonts are of fair quality at best. For starters I would recommend the freeware Kjaerhus Audio "classic series " a lot, as the quality is actually quite decent, and they aren't terribly hard on your CPU. You can find them here: http://www.kvrau dio.com/get.php?mo...p=100&start=100 All of the ones on this page are freeware. Some are of lesser quality, but a few of the mda plugs and all of the Voxengo plugins ( go to the next page for Voxengo) are pretty decent as well. AJ [This message has been edited by Bluezplayer (edited 03-17-2005).]
_________________________
AJ
|
Top
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#99851 - 03/17/05 09:48 PM
Re: Intermediate acoustic quality vst's or soundfonts sellers?
|
Senior Member
Registered: 11/10/00
Posts: 2195
Loc: Catskill Mountains, NY
|
You're quite welcome Rikki. When I get time to do it, I plan to use much of SGM128 as the base for a "supersoundfont".
I will add, or actually replace the 128's guitars with the Sonic Implants Telecaster and PRS guitar sets. I'll add SI's Blue Jay and Session drums, and some better organ and ep samples. I'll then set it up in Chainer, and then assign acoustic guitar style patches directly to Dasample's Electroacoustic Vsti. If it gets a little too CPU intensive, I'll simply make multisamples from EA and assign them to the soundfont.
This should make OMB play very nice in the GM mode. I'm still only at version 6, but I am quite comfortable using it, and I've already used it in a live set. Eventually I'll probably upgrade.
The one thing that did not work so well was trying to use the Motif ES as my OMB module. It seems no matter how I set it up, I notice a slight hiccup when changing style variations. I've tried a number of fixes, including reworking patch and bank, and other controller data of entire styles to better fit the ES. Nothing I can do seems to help.
AJ
[This message has been edited by Bluezplayer (edited 03-17-2005).]
_________________________
AJ
|
Top
|
|
|
|
|
|
|
|
|
|
|
|
|