Hi Ted,
on the initial-disk there are 4 files:
- CTMini (All Customstyles back to factory settings)
- UMDini (All Midisettings back to factory settings)
- FAVini (The favorites-list to factory setting
- HMPini (The homepage-layout to factory setting)
There is no harm to use these files, but you must know that they overwrite some changes you may (probably) had made. Save them first!
If you want to initialize your keyboard to the initial settings of the 'factory setting of the performance' follow than this procedure:
- shut down your keyboard;
- push all 3 buttons in RhythmGroup (60's, modern dance and Soul& R&B)at the same time
- and hold this buttons and put your keyboard on again.
If you want to set to 'factory-setting' push the 4 buttons (8/16 beat,Rock& Pop, R&B, Swing) with the same procedure.
Hereafter the keyboard is set to factory-settings (exclude the 4 files mentioned above).

If you had some changes (e.g. the homepagesetting) you can probably load it from a recent song you saved. Use the load-menu and go to page 2 and choose for instant only to load the homepage (put it on 'on' and the other options are 'off').
I hope this info helps you,
greetings
Cees

P.S. For one or more parts of your performance you can initialize with help of the Control Menu and choose the options you want under the INITIAL-button.

[This message has been edited by cees (edited 02-12-2003).]
_________________________
Cees wink
Webmaster of Technics KN7000 Keso-songs, Keso-Café and Keso-Jukebox. You're welcome to visit http://www.keso.nl