Hi Guys!

Having a prob getting my A90EX to transmit sysex strings using the AUX section!
I've put the string in using EDIT:AUX and that looks fine but it won't transmit the string! Is there a specific value I need to set in the External pallette for the AUXes to send sysex or anything else I need to do?

Any Ideas will be most appreciated!

Toaser
Adam's Garden

I think that the aux button includes an sysex address to be edited by the slider data parameter.

I can't edit a complete sysex including F0=data=F7 to an external sound module in the auxiliary button.

When I include de F0 byte it seems that the buffer does not accept a non data byte to be edited.

I'm supposing it works only to Roland internal sysex format, i.e. adresss + data.

Tutorial available on line at Lilchips.com site. A70 same as 90.

Thanks Robert!

The tutorial says that you can change the value of the sysex data in real time by going to EXT:AUX1/2 but is the sysex string as a whole transmitted when you change from one performance to another?

Toaster
Adams Garden

Hi
It is designed to be a 'real-time' sysex transmission similar to sending a CC message with a Slider - it sends the Sysex Header that you have entered into the AUX plus the value of the Slider as you move the slider.
Changing Performances doesn't cause a message re-transmit.

* Roland & Cakewalk Resources and Roland Newsgroups: http://www.lilchips.com *