Hi friends!

Test your KN7000:

1.Turn off your KN7000.
2.Turn it on while holding C#3-D#3-C#4.
3.Now you have access to 12 diferent pages where you can test all your keyboard.
3.Test one page each time.

That´s all for now

José

These key operations during power-up are used for diagnostics, when fault finding. They are all detailed in the Service manuals for the particular keyboards and are very helpful. I recently carried out repairs on a KN1400 and using the various key combinations, saved a considerable amount of time, in pinpointing the various faulty areas.
There are probably several other Key combinations on the KN7000 which will provide information

------------------
Willum

I WAS READING YOUR ARTICLE ABOUT DIAGNOSTIC KEYS AND WONDERED IF YOU HAVE ANY INFORMATION ON THE KN6500 AS I HAVE A SERIOUS PROBLEM WITH DISTORTED PIANO SOUNDS AND I WOULD LIKE TO TRY THIS BEFORE RESORTING TO HANDING OVER TO AN ENGINEER FOR REPAIRS.

THANKS. BILLY NEILL.

What keys are C#3-D#3-C#4??? Am I dense or something?

Hi Ted,

Not having musical training it took me awhile to figure it out. On keyboard first C is C1.

Merry Christmas,

Fran in Florida

Thanks, Fran!!! I'll ty it! Happy Saturday and an early Merry Christmas to you, too!

Ted

BILLY NEIL IF YOU CAN GET HOLD OF A PROPER TECHNICIAN FROM TECHNICS ON THE PHONE,HE WILL BE ABLE TO HELP YOU OVER THE PHONE GIVE YOU INSTUCTIONS WHAT TO PRESS ON YOUR BOARD, I HAD A PROBLEM ONCE ALSO, AND GOT IT FIXED THAT WAY, I LiVE IN CANADA YOU CAN TRY WHERE YOU ARE,BEST REGARDS,BENNO